11-20 / 22744 hits
At our job heat treatment plant, we provide a wide variety of processes. The photo shows a machine tool axle being hardened by our large vertical scan hardening machine. The gap between the workpiece and copper colored coil is extremely close. If the coil gap is too large, the following quality defects can occur. ・For shafts, if the coil is off center, the hardened casing becomes uneven. ・Longer time required for heating increases the risk of overheating. ・The area surrounding the target area is also induction heated, resulting in power loss. To prevent these defects, we design coils with the optimal coil gap. To prevent contact between the coil and workpiece, which can cause a short circuit and damage the workpiece, the coils are moved to the required distance from the workpiece before heating. While time consuming, these check measures ensure the highest quality hardening process in the industry. ~Induction Hardening Job Heat Treatment Coil Gap~
Main 3 products | Induction job heat treatment Manufacturing and sales of induction heating machinery and parts Manufacturing and sales of transistorized converters and parts |
---|---|
Type of manufacturing | Machine tools Industrial machinery Transportation equipment |
Recommended manufacturing category |
1:Surface treatment - Heat treatment - High frequency quenching 2:Surface treatment - Heat treatment - Quenching 3:Surface treatment - Heat treatment - Annealing 4:Product manufacturing - Production property - Other industrial machinery manufacturing 5:Surface treatment - Heat treatment - Full annealing 6:Surface treatment - Heat treatment - Straightening annealing 7:Surface treatment - Heat treatment - Stress relief annealing (SR treatment) 8:Surface treatment - Heat treatment - Austempering 9:Surface treatment - Heat treatment - Sub-zero treatment 10:Surface treatment - Heat treatment - Air quenching |
Type of manufacturing | Jigs and tools Machine tools Industrial machinery |
---|---|
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 2:Development and production of prototype/Small-scale production - Machining - Simultaneous 5-axis machining 3:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 4:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining 5:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining 6:Development and production of prototype/Small-scale production - Machining - Machining (resin) 7:Development and production of prototype/Small-scale production - Machining - Lathe machining (resin) 8:Development and production of prototype/Small-scale production - Machining - Stainless steel 9:Development and production of prototype/Small-scale production - Machining - Aluminum alloy 10:Development and production of prototype/Small-scale production - Machining - Urethane |
Type of manufacturing | Not selected Jigs and tools Machine tools |
---|---|
Recommended manufacturing category |
1:Surface treatment - Lap polishing - Lap polishing 2:Development and production of prototype/Small-scale production - Jig manufacturing - Jig and tool manufacturing 3:Die manufacturing - Forging die - Cold forging die 4:Die manufacturing - Forging die - Hot forging die 5:Development and production of prototype/Small-scale production - NC machining - NC milling 6:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 7:Development and production of prototype/Small-scale production - Grinding processing - Internal grinding |
This is a flexible tube for water and hot water supply piping. Please use a flexible tube for industrial piping if there is vibration or repetition in fixed piping. There is also a long length flexible tube for on-site construction. Size of 13A, 20A: 25m Size of 25A: 10m Homepage http://www.mitsumoto-bellows.co.jp/products/pd-f-tube007.html
Main 3 products | Bellows Flexible tubing Teflon hose |
---|---|
Type of manufacturing | Heavy electric machinery Industrial machinery Medical equipment |
Recommended manufacturing category |
1:Designing - Industrial equipment designing - Plant equipment designing 2:Product manufacturing - Production property - Chemical industry machinery and equipment manufacturing 3:Product manufacturing - Production property - Vacuum equipment manufacturing 4:Product manufacturing - Production property - Industrial furnace/Test furnace manufacturing 5:Parts manufacturing - Machinery part - Valve manufacturing 6:Product manufacturing - Production property - Semiconductor manufacturing equipment manufacturing 7:Product manufacturing - Production property - Food industry machinery manufacturing 8:Auto parts manufacturing - Engine - Fuel system 9:Designing - Simulation - Fluid-fluid heat 10:Product manufacturing - Plant equipment manufacturing - Marine vessel equipment manufacturing |
Type of manufacturing | Heavy electric machinery Jigs and tools Industrial machinery |
---|---|
Recommended manufacturing category |
1:Mass production - Die-casting - Zinc 2:Mass production - Die-casting - 125 t or less 3:Mass production - Die-casting - 125 - 250 t 4:Mass production - Casting - 500 g and below 5:Mass production - Mechanical processing - NC turning machining 6:Mass production - Mechanical processing - Machining 7:Mass production - Metal press - Transfer press (below 80 t) 8:Mass production - Sheet-metal processing - Bending process 9:Mass production - Mechanical processing - Iron 10:Mass production - Metal press - Thickness: 0.2 mm - 3.2mm |
Main 3 products | Small NC lathe Small machining center Various machines |
---|---|
Type of manufacturing | Jigs and tools Machine tools Industrial machinery |
Recommended manufacturing category |
1:Product manufacturing - Production property - Machine tool manufacturing 2:Designing - Industrial equipment designing - Precision automatic machinery designing 3:Designing - Industrial equipment designing - Automatic machinery manufacturing 4:Designing - Industrial equipment designing - Carrier machine designing 5:Designing - Industrial equipment designing - Industrial machinery designing 6:Designing - Industrial equipment designing - Energy-saving machinery designing 7:Development and production of prototype/Small-scale production - Jig manufacturing - Mass production jig manufacturing 8:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing 9:Product manufacturing - Production property - Energy-saving equipment/Automatic instrument manufacturing 10:Product manufacturing - Production property - Electrical machinery and apparatus manufacturing |
【Bar material】 【one chuck】 【lathe processing】 【automatic lathe】 The picture shows one-chuck processed product from bar material manufactured by automatic lathe. Size: φ6.0x12.0 Material: SUS316 Lot: 1000 or more Our automatic lathe workers have advanced technical skills, so please feel free to contact us for anything. Please contact us for precision cutting of metal from single item, prototype, development to mass production. ❐❐❐________________________________ Endo Co., Ltd. Sales Department: Nishijima Mobile: +818071657830 Email: shin-nishijima@endo-m.com Facebook: www.facebook.com/EndoFactory _________________________________❐❐❐ Website: https://www.en.endo-m.com/
Main 3 products | Linear guide/actuator sliding parts Inkjet printer head parts Environmental analyzer related parts |
---|---|
Type of manufacturing | Industrial machinery Office automation equipment Medical equipment |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 2:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining 3:Development and production of prototype/Small-scale production - Machining - Deep hole drilling 4:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining 5:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 6:Mass production - Grinding processing - NC plane grinding 7:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 8:Development and production of prototype/Small-scale production - NC machining - Machining (horizontal) 9:Mass production - Mechanical processing - Complex turning machining 10:Development and production of prototype/Small-scale production - Machining - Automatic lathe |
Precision aluminum processing: We can produce mirrors simply by cutting (using special cutting tools) aluminum material (A5052). We have achieved surface roughness of Ra0.02 (Ry0.15 - 0.30) by cutting with machining tools! Note: Cut mirrors have different properties from polished mirrors. Consult with us on how you intend to use them.
Main 3 products | Aluminum precision parts for semiconductor and LCD manufacturing equipment Aluminum precision parts for medical devices Microfabricated parts (can handle all types of materials) |
---|---|
Type of manufacturing | Industrial machinery Medical equipment Jigs and tools |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Aluminum alloy 2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 3:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining 4:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 4:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing 6:Development and production of prototype/Small-scale production - Prototype processing - Chassis prototype manufacturing 7:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining 8:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing 9:Surface treatment - Polishing/Lapping - Mirror polishing 10:Surface treatment - Plating/Chemical conversion treatment - Aluminum |
*Image cannot be posted due to confidentiality Electroless nickel plating We perform electroless nickel plating for combustion wind tunnel equipment. The current project is plating of large equipment with MIL specifications. If you have any such or similar projects, please feel free to contact us. ★ Main business of Kinki Boushoku Co., Ltd. ・ Hard chrome plating Related page… http://kinki-boushoku.co.jp/hardchrome.html ・ Electroless nickel plating Related page… http://kinki-boushoku.co.jp/electrolessnickel.html ・ Electric nickel plating Related page… http://kinki-boushoku.co.jp/electricnickel.html ・ Copper plating, Silver plating, Tin plating, Solder plating Related page… http://kinki-boushoku.co.jp/other.html#ot1 ★ Plating content ・ What is hard chrome plating? Related page… https://www.nc-net.or.jp/company/87574/product/detail/79112/ ・ Hard chrome plating method Related page… https://www.nc-net.or.jp/company/87574/product/detail/76817 ・ Buffing before and after plating Related page… https://www.nc-net.or.jp/company/87574/product/detail/76600 ・ Cylindrical polishing Related page… https://www.nc-net.or.jp/company/87574/product/detail/120700 ・ Blast processing Related page… https://www.nc-net.or.jp/company/87574/product/detail/120766/ ★ We will response comprehensively. Please feel free to contact us! http://kinki-boushoku.co.jp
Main 3 products | Plating Thermal spraying Cleaning |
---|---|
Type of manufacturing | Heavy electric machinery Industrial machinery Electronic parts |
Recommended manufacturing category |
1:Surface treatment - Plating/Chemical conversion treatment - Hard chrome (large) 2:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (large) 3:Surface treatment - Plating/Chemical conversion treatment - Hard chromium (rack) 4:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (rack) 5:Surface treatment - Plating/Chemical conversion treatment - Tin (rack) 6:Surface treatment - Plating/Chemical conversion treatment - Copper (rack) 7:Surface treatment - Plating/Chemical conversion treatment - Gold/Silver plating 8:Surface treatment - Plating/Chemical conversion treatment - Nickel (rack) 9:Surface treatment - Plating/Chemical conversion treatment - Baking (hydrogen embrittling) 10:Surface treatment - Polishing/Lapping - Electropolishing |
Type of manufacturing | Measuring machinery Telecommunication equipment Medical equipment |
---|---|
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Stainless steel 2:Development and production of prototype/Small-scale production - Machining - Aluminum alloy 3:Development and production of prototype/Small-scale production - Machining - Copper alloy 4:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 5:Development and production of prototype/Small-scale production - Machining - Automatic lathe 6:Development and production of prototype/Small-scale production - Machining - Iron 7:Development and production of prototype/Small-scale production - Machining - Brass |
11-20 / 22744 hits