81-90 / 8035 hits
At the request of a camera manufacturer, we tested mechanical parts that fit around a shutter for two weeks that were nearly precise enough for mass production. We were praised for our speed with this assignment. The key was our knowledge of rolling analysis.
| Main 3 products | We're the prototype specialists! Metal and plastic test parts (automotive, TVs, digital cameras, digital video, mobile phones) Transportation equipment (power train system testing, drive system testing), electronic parts (digital camera lens barrels, mobile phone camera module testing) Injection molding dies, die-casting, test dies |
|---|---|
| Type of manufacturing | Transportation equipment Telecommunication equipment Industrial machinery |
| Recommended manufacturing category |
1:Mass production - Mechanical processing - Five-face/axes machining 2:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 3:Development and production of prototype/Small-scale production - Casting - die-cast 4:Development and production of prototype/Small-scale production - NC machining - Machining (horizontal) 5:Die manufacturing - Plastic mold - Insert molding die 6:Mass production - Plastic - Thin wall molding |
| Main 3 products | Full-Scale Plating Long-Length Plating Plating Liquid Recycling System (In-Hous |
|---|---|
| Type of manufacturing | Machine tools Industrial machinery Transportation equipment |
| Recommended manufacturing category |
1:Surface treatment - Plating/Chemical conversion treatment - Hard chromium (rack) 2:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical grinding 3:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical mirror grinding 4:Development and production of prototype/Small-scale production - Grinding processing - Centerless grinding 5:Surface treatment - Other surface treatment - Buffing 6:Surface treatment - Plating/Chemical conversion treatment - Baking (hydrogen embrittling) 7:Surface treatment - Polishing/Lapping - Mirror polishing 8:Surface treatment - Plating/Chemical conversion treatment - Brass 9:Surface treatment - Plating/Chemical conversion treatment - Stainless steel 10:Surface treatment - Plating/Chemical conversion treatment - Copper |
| Main 3 products | ゴム 樹脂 スポンジ 発泡ポリウレタン 発泡ポリエチレン ゴムスポンジ |
|---|---|
| Type of manufacturing | Industrial machinery Medical equipment Leisure goods |
| Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Prototype processing - Punching 2:Mass production - Rubber - Blanking 3:Development and production of prototype/Small-scale production - Machining - Sponge 4:Mass production - Mechanical processing - Sponge 5:Mass production - Plastic - Injection molding 6:Mass production - Blank cutting - Water jet processing 7:Development and production of prototype/Small-scale production - Machining - Urethane 8:Assembly/Inspection - Side job processing - Manual labor 9:Mass production - Plastic - Expansion molding 10:Material - Industrial waste / Recycling - Transport agents |
For small lots of resin molds, we offer companies that employ fairly expensive production dies our injection molding using simple dies with excellent cost performance. We can make 100 to 10,000 units of injection molds as per your company's request.
| Main 3 products | Prototype models Vacuum-cast models (silicon models, acrylic form) Simple aluminum die production |
|---|---|
| Type of manufacturing | Home electrical appliances Office automation equipment Telecommunication equipment |
| Recommended manufacturing category |
1:Die manufacturing - Plastic mold - Injection molding die 2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 3:Development and production of prototype/Small-scale production - Prototype processing - Vacuum injection molding 4:Mass production - Plastic - Injection molding 5:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 6:Parts manufacturing - Machinery part - Gear manufacturing 7:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing 8:Development and production of prototype/Small-scale production - Prototype processing - Photoforming 9:Surface treatment - Coating - Air-spray coating 10:Assembly/Inspection - Inspection - Measuring |
"<Example of character engraving by electric discharge machining: Convex character discharge of JIS display mark> This is an example of the convex character discharge of the JIS display mark on the pin tip surface of high-speed tool steel SKH51 (high-speed steel). In this case, the character design of ""JIS"" was finished to a size of Φ0.5 mm around the mark engraved part. Regarding electric discharge machining as in this case, Saltec can perform consistent machining from electrode creation to engraving. <From general-purpose symbols and marks to customer-specific logos and brand designs> Regarding the engraving process of characters, Saltec can handle not only general identification signs and symbols such as JIS mark and recycling symbol, but also original designs such as logo mark, brand design and company emblem designed by the customer. Not only when the design mark data is prepared by the customer, but also for the design that has not been converted into data. We will respond from the data creation based on close discussion with the customer. If you have any problems with engraving such as identification mark, logo mark, brand design, company emblem, etc., please contact us. Saltec Co., Ltd. 46-2 Kamifunahashi, Inakadate-mura, Minamitsugaru-gun, Aomori Prefecture TEL: 0172-58-2281 mail: scad@saltec.co.jp"
| Main 3 products | Fine engraving Mold parts Mold design, production, processing |
|---|---|
| Type of manufacturing | Not selected Jigs and tools Electronic parts |
| Recommended manufacturing category |
1:Surface treatment - Printing and others - Engraving 2:Development and production of prototype/Small-scale production - Machining - High rigid material 3:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 4:Die manufacturing - Plastic mold - Part processing 5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 6:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining |
Copper busbars that are produced based on the JIS H 3140 standards! Material: Copper busbar, copper rod Dimensional tolerance: within general tolerance range We accept challenges for dimensional tolerance! Please contact us. Lot:1 to 100 pieces (orders available from 1 piece) Industries and applications: Used in the electrical equipment industry for transformers, control panels, and distribution board components. Material dimensions:Specializing in copper busbars from 3 mm to 20 mm. Regularly processing copper rods with diameters from 10 mm to 55 mm. Processing Machines and Methods: Press processing, machining, lathe processing Features:JIS standard Copper busbars comply with JIS H 3140. Copper strips and plates (we refer to standard-sized plates like 365×1200 mm thickness) comply with JIS H 3100. Copper rods comply with JIS H 3250 standards. Our copper busbars are sourced through material trading companies from both domestic and international manufacturers, such as Mitsubishi Materials, Oriental Copper, and Furukawa Electric. In order to be distributed as JIS-certified products, the following criteria must be met for copper busbar production: Composition: Oxygen-free copper (C1020) with a purity of 99.96% or higher Tough pitch copper (C1100) with a purity of 99.90% or higher Mechanical Properties: Tests such as bending tests, conductivity tests, and hydrogen embrittlement tests are conducted by analyzing samples taken from ingots or finished products. Length Tolerance: Allowable length deviation is +15 mm, ±0 mm. Bending tolerance is also measured at this time. Edge Shape: The edges are rounded with a radius of 1.0 mm or chamfered with a flat surface of 1.0 mm or less. Burrs generated during manufacturing must not remain. The edges of the busbars from all manufacturers are rounded. For each lot of copper busbars manufactured, a composition inspection is mandatory, and an inspection certificate, called a mill sheet, is kept by the manufacturer. If a traceability certificate for the materials is required, please inform your sales representative when placing your order. We can request it during material procurement and deliver it together with the product, though it will be a copy. However, please note that it will not be included unless requested. A major advantage of copper busbars is that a manufacturing process free from harmful substances has been established for about 70 years, making it easy to perform detailed inspections in case of any trouble or when receiving deliveries. This is why copper is considered a "miracle material" that can safely deliver electricity and heat. Please leave everything from copper busbar procurement to processing and plating, to ISHIGAKI SHOUTEN! For copper busbar and copper rod machining inquiries, feel free to contact us. Please take a look out website for detailed explanations about our copper busbar, copper rod processing techniques, and precision copper components https://ishigaki-st.com ISHIGAKI SHOUTEN Inc. Address: 1-629 Seko, Moriyama, Nagoya City, Aichi Prefecture, 463-0068, Japan Phone: +81-52-793-3080 Fax: +81-52-793-1079 E-mail: info@ishigaki-st.com Contact: Sales Department, Murakami/Sodeoka
| Main 3 products | Transformer parts (copper strips, etc) Terminals Contacts |
|---|---|
| Type of manufacturing | Heavy electric machinery Industrial machinery Transportation equipment |
| Recommended manufacturing category |
1:Mass production - Metal press - Copper 2:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 3:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing 4:Mass production - Mechanical processing - Machining 5:Development and production of prototype/Small-scale production - Prototype processing - Bending 6:Mass production - Mechanical processing - Complex turning machining 7:Mass production - Mechanical processing - High precision 8:Development and production of prototype/Small-scale production - Blank cutting - Copper/Aluminum 9:Material - Nonferrous metal distribution - Copper and brass products 10:Surface treatment - Plating/Chemical conversion treatment - Copper |
| Main 3 products | casting MetalCasting HighPrecisionCasting |
|---|---|
| Type of manufacturing | Heavy electric machinery Industrial machinery Kitchen |
| Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Casting - Cast steel 3:Development and production of prototype/Small-scale production - Casting - 5kg or more 4:Mass production - Casting - Cast steel 5:Die manufacturing - Casting die - Die-casting die 6:Die manufacturing - Casting die - Die-casting part processing 7:Mass production - Casting - 5 kg and over |
NAOYA HIDA & Co.は、飛田直哉氏が手がける時計ブランドです。 熟練職人による手作業と最新鋭工作機械による加工を組み合わせた現代のヴィンテージ ウォッチ 協栄プリント技研株式会社では、独自の技術で、デザインを忠実に切削加工をした 時針、分針、秒針を提供しております。
| Main 3 products | Precision press dies [Design, manufacture and sales] Micro-manufactured parts ［Manufacture and sales］ |
|---|---|
| Type of manufacturing | Jigs and tools Telecommunication equipment Electronic parts |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Blanking die 2:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 3:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 4:Die manufacturing - Cutting dies - Cutting blade cutting die 5:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 6:Die manufacturing - Rubber mold - Light electrical/earthing rubber 7:Die manufacturing - Press die - Fine blanking die |
This is our plastic product manufacturing workshop. We have injection molding machines ranging from 80 tons to 850 tons. We specialize in injection molding various plastic products (PP, ABS, PC, POM, fiberglass-reinforced plastics, TPE, etc.).
| Main 3 products | Robot components Fixtures CNC machining components |
|---|---|
| Type of manufacturing | Not selected Jigs and tools Home electrical appliances |
| Recommended manufacturing category |
1:Mass production - Plastic - Injection molding 2:Development and production of prototype/Small-scale production - NC machining - NC milling 3:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 4:Development and production of prototype/Small-scale production - Machining - General-purpose lathe machining 5:Designing - Jig and tool designing - General jig designing 6:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 7:Development and production of prototype/Small-scale production - Machining - Automatic lathe |
| Main 3 products | Stainless Aluminum Titanium |
|---|---|
| Type of manufacturing | Telecommunication equipment Electronic parts Leisure goods |
| Recommended manufacturing category |
1:Surface treatment - Plating/Chemical conversion treatment - Colored alumite 2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 3:Development and production of prototype/Small-scale production - Machining - General-purpose lathe machining 4:Designing - Industrial equipment designing - Automatic machinery manufacturing 6:Development and production of prototype/Small-scale production - Prototype processing - Chassis prototype manufacturing 7:Mass production - Mechanical processing - Aluminum alloy 8:Mass production - Mechanical processing - Stainless 9:Mass production - Mechanical processing - Titanium 10:Development and production of prototype/Small-scale production - Prototype processing - Bending |
81-90 / 8035 hits
