31-40 / 2006 hits

31.

MG co.,ltd. Location:  Miyagi  Miyagi-gun Rifu-chou Shikarashidai 6-1-8 Employees 180

We offer both resin and metal molding products. Based on our advanced developing capability, our molding technology led to a number of technologies and products: insert multiplex molding, two-color i...

Applied technology for plastic magnet molding [Two-color injection molding/Integral molding]

As a plastic magnet molding manufacturer, we produce distinctive, highly functional products. We manufacture motor parts, using both the two-color injection molding technology with plastic magnets and engineering plastics, and the integral injection molding technology including the shaft parts. In addition, our range of accurate multi-polarized magnet products, with a minimum magnetizing pitch of 40 μ, are used as sensors, motors, and meter magnets for rotary encoder magnets and linear encoder magnets.

Main 3 products Automotive control panels  Plastic magnets  Writing materials
Type of manufacturing Electronic parts  Electrical component for transportation equipment  Stationery products
Recommended manufacturing category

1:Mass production - Plastic - Plastic magnet molding

2:Mass production - Plastic - Dual molding

3:Mass production - Plastic - Injection molding

4:Mass production - Plastic - Thin wall molding

5:Designing - Mold designing - Injection molding die

6:Die manufacturing - Plastic mold - Manufacturing

7:Die manufacturing - Plastic mold - Part processing

32.

Iwaki Diecast Co.,Ltd. Location:  Miyagi  -Watari-gun -Yamazaki-51-2 Washiashi‎, Yamamoto-chō Employees 313

■ Aluminum die cast products ■ Squeeze die cast products using vertical machines ■ Zinc die cast products ■ Ultra-high speed and precise zinc die cast products using special die casting structures ...

Aluminum die casting [Automotive parts, 2-wheel parts, general parts, and office machine parts, etc.]

Aluminum die casting [Automotive parts, 2-wheel parts, general parts and office machine parts, etc.] ◆ Features The most commonly used die casting is aluminum alloy. This light and strong alloy has excellent corrosion resistant properties and is widely used in applications for various fields. ◆ Iwaki Diecast’s aluminum die casting production system We use a launder system, which enables us to always supply clean raw materials, when feeding the molten metal from the melting furnace to the holding furnace. The scrap material, which is generated during trimming, is returned to the melting furnace via an underground conveyor. Our casting equipment is automated featuring a unique manufacturing method that is both highly productive and very safe. It produces a smooth surface with a minimal number of blowholes. ◆ Melting process • Our melting is centralized with high thermal efficiency. • The molten metal is poured into the holding furnace using launders (troughs) and porters. • We supply clean molten metal with minimal temperature difference by using an electric furnace. ◆ Casting process • Our own automated and systematized facilities enable us to automate processes up to the separation of gates. • Our die temperature control enables us to make products of consistent quality. • Our management system CAMOS allows us to visually monitor the production status. ◆ Main usages Automotive parts, 2-wheel parts, general parts and office machine parts, etc.

Main 3 products Aluminum and zinc die cast products  Ultra-high speed and precise zinc die cast products using special die casting constructions  Iron and stainless steel injection molded parts…MIM (Metal Injection Molding)
Type of manufacturing Not selected    
Recommended manufacturing category

1:Mass production - Plastic - Metal injection molding (MIM)

2:Mass production - Casting - Metal injection molding (MIM)

4:Mass production - Die-casting - Aluminum

5:Mass production - Casting - Cast steel

6:Designing - Mold designing - Casting die designing

7:Surface treatment - Plating/Chemical conversion treatment - Zinc die-cast

8:Die manufacturing - Casting die - 3D modeling

9:Mass production - Die-casting - 125 t or less

10:Mass production - Die-casting - 125 - 250 t

33.

Asano Co.,Ltd. Location:  Gunma  Isesaki-shi Sanwa-cho 2718-1 Employees 287

Product development supporting and production preparation supporting Business range: trial sheet metal parts production (trial stamping dies – trial sheet metal parts production – assembly), trial ...

Custom-made PROTOTYPE automotive parts

Custom-made PROTOTYPE automotive parts Prototype automotive parts manufacturer of top class in Japan sample vehicle made with our technologies We have a variety of techniques for the prototype auto parts production

Main 3 products prototype sheet metal parts    
Type of manufacturing Jigs and tools  Industrial machinery  Transportation equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

2:Assembly/Inspection - Inspection - Metal press

3:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

4:Assembly/Inspection - Assembly - Auto parts assembly

5:Development and production of prototype/Small-scale production - Sheet-metal processing - Pipe machining

6:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

7:Die manufacturing - Plastic mold - Injection molding die

8:Designing - Mold designing - General metal press die

9:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

10:Die manufacturing - Plastic mold - Insert molding die

34.

Yoneyama Mold.Co.,Ltd Location:  Nagano  Shimoina-gun 402-12 Ojima, Matsukawa-cho Employees 26

We are constantly pursuing the latest technology and constantly evolving in order to provide plastic molds that are trusted by our customers. In particular, in the field of microfabrication, we have 4...

Chemical Micro flow path Mold Short delivery time Fine processing

マイクロ流路金型部品 材質:HPM38(HRC52) 形状寸法:高さ 0.05~0.4㎜      溝幅 最小0.1mm 加工機:Android 化学分野において、 『有機合成』『化学物質分析』『液晶技術』等で 活用が期待される『マイクロ流路』 その、金型部品です! 形状 材質等のお問い合わせは、こちらまで! 有限会社 米山金型製作所 〒339-3304 長野県下伊那郡松川町大島402-12 Tel:0265-36-5476  Fax:0265-36-6309 URL:http://www.y-mold.com

Main 3 products Plastic mold design and manufacturing  Plastic mold parts processing  Machining, wire discharge, carving electric discharge machining
Type of manufacturing Home electrical appliances  Electrical component for transportation equipment  Medical equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

2:Die manufacturing - Plastic mold - Part processing

3:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

4:Die manufacturing - Plastic mold - Injection molding die

5:Die manufacturing - Plastic mold - Insert molding die

6:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

7:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining

8:Development and production of prototype/Small-scale production - Grinding processing - Plane grinding

9:Die manufacturing - Plastic mold - NC data creation

10:Designing - Mold designing - 3D modeling (plastic)

35.

Hashimoto Precision Industry Co., Ltd. Location:  Ibaraki  Kasama-shi 3122 Ago Employees 45

Hashimoto Precision Industry is a manufacturing company that specializes in composite caulking and precision press work that performs all processes from die fabrication to press work. We have achieved...

Main 3 products Caulking press  Flat spring parts  Press/die manufacturing
Type of manufacturing Home electrical appliances  Telecommunication equipment  Electronic parts
Recommended manufacturing category

1:Die manufacturing - Press die - Progressive die

2:Mass production - Metal press - Thickness: 0.2 mm - 3.2mm

3:Mass production - Metal press - Combined press-joining

4:Mass production - Metal press - Thickness: below 0.2 mm

5:Mass production - Metal press - Progressive press (35 - 80 t)

6:Mass production - Metal press - Copper

7:Mass production - Metal press - Phosphor bronze

8:Mass production - Metal press - Brass

9:Mass production - Metal press - Stainless steel

10:Designing - Mold designing - General metal press die

36.

Yoshida Kanagata Kogyo Co., Ltd Location:  Aichi  Oubu-shi 1-589, Bouzuyama, Yokone-cho Employees 65

☆ We are a long-established mold maker with 70 years of business in Oubu City, Aichi Prefecture ☆ "From the cradle to the grave" is our motto. We will accompany you from the product launch to the di...

[Electrode production] Production of high-precision, high-difficulty electrodes

[Electrode production] Production of high-precision, high-difficulty electrodes [Material] tough pitch copper Oxygen-free copper  The rigidity will increase if rolled. [Processing] We use high-precision machining with linear drive [Feature] Excellent electrode processing is essential to perform "pika discharge" (polishless/without polish) in die-sinker EDM. Yoshida Kanagata Kogyo Co., Ltd. 1-589, Bouzuyama, Yokone-cho, Oubu-shi, Aichi 474-0011 TEL: +81-562-48-3456 FAX: +81-562-46-1135 Person in charge: Katsuhisa Yoshida

Main 3 products Die casting mold design and production  Various mold parts production  Various mold maintenance
Type of manufacturing Jigs and tools  Industrial machinery  Transportation equipment
Recommended manufacturing category

1:Die manufacturing - Casting die - Die-casting die

2:Die manufacturing - Casting die - Designing

3:Die manufacturing - Casting die - Manufacturing

4:Assembly/Inspection - Repair - Die repair

5:Die manufacturing - Casting die - Die-casting part processing

6:Designing - Data creation (3D scan) - Data creation (3D scan)

7:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

8:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

9:Die manufacturing - Casting die - 3D modeling

10:Designing - Mold designing - Casting die designing

37.

TADA PLASTIC INDUSTRIAL CO.,LTD. Location:  Osaka  Tsudo Fujiidera 2-12-8 Employees 191

Ideas and technology that lead to innovation Fusion of technology  Injection molding  Urethane foam  Micro pump  Precision rubber molding

Automotive parts, Camera lens cleaning unit, Small DC pump (micropump mechanism / structural design) / housing molding / assembly

"Proposal of camera cleaning unit for automobiles Small DC pump (micropump mechanism / structural design) / housing molding / assembly ① ADAS driving support & security Back monitor parts for driving support system ② Small DC pumps (micro pumps) are proposed from the mechanical and structural design and produced at our factory. ③ Some of the resin molded products, (including housing molding) are produced at our factory. Features High flow rate, high pressure, optimal unit design (1) Achieve cleaning power with high flow rate and high pressure. (2) Further noise reducing and vibration by designing the mechanism and structure of the unit. Application Automobile parts, cleaning pump unit for back monitor For cleaning camera lenses Improve monitor visibility * We will respond promptly to inquiries □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ TADA PLASTIC INDUSTRIAL CO.,LTD. 2-12-8, Tsudo, Fujiidera Shi, Osaka, Japan 583-0037 TEL:0081-729540981 http://www.tadapla.co.jp Ideas and technology that lead to innovation Fusion technology  Injection molding  Urethane foam  Micro pump  Precision rubber molding □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□

Main 3 products Compact DC pump  Injection molding  Urethane foam
Type of manufacturing Transportation equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Plastic - PU (polyurethane)

2:Mass production - Plastic - Expansion molding

3:Mass production - Plastic - GFRP (glass fiber reinforced plastic)

4:Mass production - Plastic - Gas injection

5:Mass production - Plastic - Injection molding

6:Mass production - Plastic - 60 - 300 t

7:Mass production - Plastic - PPS (polyphenylene sulfide)

8:Mass production - Plastic - CFRP (carbon fiber reinforced plastic)

9:Mass production - Plastic - PBT (polybutylene terephthalate)

10:Mass production - Plastic - Elastomer

38.

OTIS Co., Ltd Location:  Okayama  Maniwa Nakahara 202-13 (Maniwa Industrial Complex No.13) Employees 205

We, OTIS, are the electronic parts maker specialized in precise pressing manufacturing functional materials: double sided tapes, films, and cushions into a multilayer. OTIS processed products are ...

【0.3mm Thickness Mass Production Achievement】 Smart phones dieing out press for panel stabilizing double-sided tape, prototype, mass production 【Slim Border】

Current Smart phones, tablets, and mobile devices’ monitor sizes are becoming larger and thinner, in other words, monitor surroundings are also becoming thinner. Since the place where the double sided tapes are applied to stabilize a glass cover and touch panel is becoming narrower, meaning balancing both adhesion strength and waterproof is one of the problems to be solved. At OTIS, by utilization of our unique process technologies, 【punching die/blade requirement】【analysis and analyze of materials】, we have achieved to punch press double sided tape pouch pressing with a width of 0.3mm. We also have achieved in manufacturing a variety of double-sided tapes: non-woven base, PET base, foam body base, Acryl foam, special base etc. Our facility is equipped with cutting plotter, in other words, a small lot sampling can be handled in a speedy manner. We can handle short lead time prototyping or mass production inquires clean room in Japan and/or China. Trust manufacturing service is also available.

Main 3 products Complex precision punching press for functional materials (cushion, double sided tape, film, sheet, metal foil, etc. )  Metal films (in-house developed shield gasket: conduction, contact, EMS protection, static electricity protection, shielding, and grounding)  Designing and developing of rotary screen printers (functional materials), original processing machines, molds, and jigs.
Type of manufacturing Telecommunication equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Rubber - Press stamping

2:Development and production of prototype/Small-scale production - Prototype processing - Punching

3:Mass production - Plastic - Film-lamination

4:Mass production - Plastic - Sheet / film processing

5:Mass production - Rubber - Home electrical appliances

6:Mass production - Rubber - Tire, wheel, and other auto parts

7:Mass production - Rubber - Packing-related products

8:Mass production - Rubber - Mobile phones

9:Die manufacturing - Press die - Designing

39.

Honma Precision Metalworking Co., Ltd. Location:  Saitama  Mikajiri, Kumagaya, 5361, Employees 75

Honma Precision Metalworking Co., Ltd ‒ We manage to adapt unique ultra-precision manufacturing bycombining extensive experiences and one of the most high-end machine tools. We have been working on d...

Main 3 products Design and fabrication of precision dies and molds  Design and fabrication of precision jigs  Fabrication of precision metal parts
Type of manufacturing Jigs and tools  Measuring machinery  Electronic parts
Recommended manufacturing category

1:Designing - Jig and tool designing - General jig designing

2:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing

3:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

4:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining

5:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

6:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

7:Development and production of prototype/Small-scale production - NC machining - Machining (horizontal)

8:Development and production of prototype/Small-scale production - Grinding processing - Jig grinding

9:Development and production of prototype/Small-scale production - Grinding processing - Form grinding

10:Development and production of prototype/Small-scale production - Machining - High rigid material

40.

MIYUKI CO.,LTD Location:  Toyama  Takaoka-shi 285 Arayashiki Employees 25

Miyuki is a company that designs and manufactures molds for plastic molding in Takaoka City, Toyama Prefecture. We have a track record in unscrewing of foods, pharmaceuticals, medical equipment, cosme...

(Resin mold design and manufacture for injection molding) Spout, resin, food-related, plastic mold, hot runner, made by Seiki Corporation

Spout Industry: Food-related industry Resin used: PP Gate: Hot runner valve pin (Seiki Corporation) After finishing the processing of the mold base, we asked Seiki Corporation to incorporate it, then we incorporate hot runner. As shown in the picture, there are many wires due to many valve pins. It's hard to handle it in a very narrow place, but since we were used to it, we completed it in one day. [PR] ◇ Miyuki's main track record ・ Production of more than 5,000 molds for injection molding ・ Blow molding, pressure forming, in-mold molding, insert molding, and other various mold manufacturing ◇ Specialty field ・ Unscrewing multi-cavity mold for food, pharmaceuticals, cosmetics, etc. ・ multi-cavity hot runner molds ・ General-purpose resin such as PP and PE ・ Engineering plastics and super engineering plastics such as PA, POM, PPS ・ Molds for super engineering plastics molding with complicated mechanisms such as automotive and semiconductors ・and others ◇ Other capabilities ・ We also provide mold maintenance and repair made by other companies. ・ Please feel free to contact us if you have any problems with the mold, such as want to change the design but have no drawing. ◇ Company information 285 Arayashiki, Takaoka City, Toyama Prefecture 933-0319 MIYUKI CO.,LTD TEL: 0766-31-0646 FAX: 0766-31-0647

Main 3 products Hot runner mold, high cycle mold, multi-cavity mold, high durability injection molding mold  Mold for injection molding of super engineering plastics such as PPS&fluorine, mold for insert molding  Prototype, small lot molding, precision parts and jigs and tools production
Type of manufacturing Transportation equipment  Medical equipment  Stationery products
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Injection molding die

2:Die manufacturing - Plastic mold - Insert molding die

3:Die manufacturing - Plastic mold - Thermoset resin die

4:Die manufacturing - Plastic mold - Blow molding die

5:Die manufacturing - Plastic mold - Vacuum/Air pressure molding die

6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

7:Mass production - Plastic - Injection molding

8:Development and production of prototype/Small-scale production - Prototype processing - Small-lot/Injection molding

9:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

10:Assembly/Inspection - Repair - Die repair

31-40 / 2006 hits

New registration