51-60 / 2076 hits

51.

Seki Press Co., Ltd. Main Factory Location:  Ibaraki  Hitachi 4-3-20 Chikokucho Employees 85

At Seki Press, we use a variety of our own tools to quickly respond to a wide range of customer requests, from high-mix, low-volume manufacturing to ultra-high-volume production. Check out our webs...

The round shaped metal fittings applied Splitting (Warisaki) processing technology

We provide a round-tip product by applying splitting (Warisaki) processing technology. ・To change the material shape from flat metal to round metal! ・To put the round shaped part to the flat metal directly! We can cope with a specially ordered product if the diameter of the round shape is within the dimension which can be put on the press. We constantly handle with the extending of the materials.

Main 3 products Welding and parts assembly  Mold design and mfg  Single press stamping
Type of manufacturing Heavy electric machinery  Transportation equipment  Electrical component for transportation equipment
Recommended manufacturing category

1:Die manufacturing - Press die - Shaving die

2:Mass production - Metal press - Transfer press (200 - 500 t)

3:Mass production - Metal press - Progressive press (80 - 200 t)

4:Mass production - Metal press - Shaving

5:Mass production - Metal press - Transfer press (80 - 200 t)

6:Designing - Mold designing - Progressive die designing (auto)

7:Designing - Mold designing - Transfer press die designing

8:Die manufacturing - Press die - Transfer press die

9:Die manufacturing - Press die - Fine blanking die

10:Assembly/Inspection - Inspection - Metal press

52.

Plamoul Seiko Co.,Ltd. Location:  Miyagi  Tomiya City 4-3-5 Takanomori Employees 42

“The Degassing Revolution: Unbelievable Degassing. Better Quality and Reduced Cost.” Have you ever faced with a problem during conservation of injection moulds and/or cast moulds due to poor degass...

“Gas-tosu” (Registered trade name), Ejector-Pin, Core-Pin with gas-venting function

“Gas-tosu,” Ejector-Pin, Core-Pin with gas-venting function "Gas-tosu" is a registered trade name. "tosu" is a Japanese word, and it means making something pass. Therefore, "Gas-tosu" is the tool which makes gas pass. ◆The features of Gas-tosu Gas-tosu is used as Ejector-pin or Core-pin with gas-venting (air-venting) function. The vent width in Gas-tosu can be selected from 0.005~0.05mm according to the fluidity of resin. Therefore, Gas-tosu is acceptable to every kinds of resin. The inclined-processing is being performed into Gas-tosu to efficiently exhaust the gas which occurs in die. Installing the gas vent with the width which is 0.005~0.05mm is possible according to the fluidity of resin.

Main 3 products Spool, Runner parts, ejector pin ,  Connector parts  
Type of manufacturing Not selected  Jigs and tools  Electronic parts
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Part processing

2:Die manufacturing - Plastic mold - Designing

3:Die manufacturing - Plastic mold - Manufacturing

4:Designing - Mold designing - Injection molding die

5:Die manufacturing - Plastic mold - Injection molding die

6:Material - Plastic material distribution - ABS resin

7:Material - Plastic material distribution - PP (polypropylene)

8:Material - Plastic material distribution - PC (polycarbonate)

9:Material - Plastic material distribution - POM (polyoxymethylene)

10:Die manufacturing - Plastic mold - Thermoset resin die

53.

KITOSEIKI Location:  Aichi  Toyota City 50 Nakane, Nakamachi Employees 45

-

Main 3 products Prototype automobile parts・・・Cylinder, housing, piston, shaft, valve, eccentric shaft, crankshaft, etc.    
Type of manufacturing Transportation equipment  Machine tools  Measuring machinery
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

2:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical grinding

3:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

4:Product manufacturing - Production property - Machine tool manufacturing

5:Product manufacturing - Production property - Vacuum equipment manufacturing

6:Development and production of prototype/Small-scale production - Grinding processing - Thread grinding

7:Development and production of prototype/Small-scale production - Machining - Titanium

54.

HOEI Industry Co. Ltd Location:  Aichi  Shinshiro City 1-369 Shingenhira, Kawada Employees 60

We would like to introduce our main business latest initiatives in 2022. ○ Precision metal processing field: ・Started manufacturing small metal parts that require high precision from the productio...

5-axis machining product prototype processing, mass production processing

5 axis machining center We have C40 and C400 made by German maker HERMLE. We have a track record of 5-axis machining for about 15 years, and currently support mainly small-lot product prototyping and mass production machining from vehicle parts, aircraft parts, mold parts, and medical equipment parts. We also respond flexibly to production risk avoidance, such as sudden production increases and backup production. Please let us know. □ Product material Aluminum, Ti-6Al-4V, cobalt alloy, SUS630, etc. ▶Contact us TEL: +81536-22-0696 e-mail: hoei@hoic.co.jp Precision Machining Division Sales person: Miwa

Main 3 products Bioplastic products  medical equipment OEM  various precision metal parts processing
Type of manufacturing Machine tools  Transportation equipment  Medical equipment
Recommended manufacturing category

1:Mass production - Plastic - Biodegradable plastic

2:Product manufacturing - Medical equipment manufacturing - Medical equipment manufacturing

3:Die manufacturing - Plastic mold - Part processing

4:Designing - Mold designing - Progressive die designing (auto)

5:Development and production of prototype/Small-scale production - Machining - Simultaneous 5-axis machining

6:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining

7:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining

8:Designing - Data creation (3D scan) - Data creation (3D scan)

9:Mass production - Mechanical processing - Titanium

10:Designing - Mold designing - General metal press die

55.

Tamagawa High Tech Co.,Ltd. Location:  Aomori  Sannohe District Fukuchi Factory I (Inside), Kanuemonyama-1-1 Hoshioka, Nambu Employees 353

Tamagawa High Tech's Sheet Metal Manufacturing Department (Fukuchi Factory No. 1) has a track record of producing a wide variety of products, including large enclosures for semiconductor manufacturing...

Main 3 products Defense related equipment  Outdoor enclosures  Semiconductor related equipment
Type of manufacturing Industrial machinery  Telecommunication equipment  Medical equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Sheet-metal processing - Precision sheet metal machining

2:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

3:Development and production of prototype/Small-scale production - Sheet-metal processing - Chassis manufacturing

4:Mass production - Sheet-metal processing - Thin (t0.5 or less) / Small sheet metal processing

5:Development and production of prototype/Small-scale production - Sheet-metal processing - Coating

6:Surface treatment - Coating - Powder coating

7:Surface treatment - Printing and others - Silk screen printing

8:Mass production - Blank cutting - stainless

9:Mass production - Blank cutting - Copper / aluminum

10:Surface treatment - Plating/Chemical conversion treatment - Chemical conversion coating

56.

Hatta Kogyo Co., Ltd Location:  Osaka  Sakai-shi 2-18-40 Hattanishimachi, Nakaku Employees 30

Under the corporate message "Good products, originality, zeal, and harmony," we operate 24 hours a day, regardless of Sundays or holidays. All of our employees collaborate to serve our consumers, and ...

Stainless steel (SUS304) ion nitriding

Hatta Kogyo specializes in ion nitriding of stainless steel (SUS304). We can assist you from prototyping to mass production. Processing method: Ion nitriding treatment Material: Stainless steel (SUS304) Industry: infrastructure, others   For further information, please visit our website. Ion nitriding stainless steel (SUS304) https://www.hatta.co.jp/ Hatta Kogyo Co., Ltd. 2-18-40 Hattanishimachi, Naka-ku, Sakai-shi, Osaka TEL +8172-277-7227 FAX +8172-277-8960 https://www.hatta.co.jp/

Main 3 products Vacuum heat treatment  Ion nitriding (plasma nitriding)  Sub-zero processing
Type of manufacturing Not selected    
Recommended manufacturing category

1:Surface treatment - Heat treatment - Vacuum quenching

2:Surface treatment - Heat treatment - Nitridation

3:Surface treatment - Heat treatment - Sub-zero treatment

4:Surface treatment - Heat treatment - Carburized quenching

5:Surface treatment - Heat treatment - Solution heat treatment

6:Assembly/Inspection - Inspection - Measuring

7:Surface treatment - Heat treatment - Quenching

57.

Hashimoto Precision Industry Co., Ltd. Location:  Ibaraki  Kasama-shi 3122 Ago Employees 45

Hashimoto Precision Industry is a manufacturing company that specializes in composite caulking and precision press work that performs all processes from die fabrication to press work. We have achieved...

Main 3 products Caulking press  Flat spring parts  Press/die manufacturing
Type of manufacturing Home electrical appliances  Telecommunication equipment  Electronic parts
Recommended manufacturing category

1:Die manufacturing - Press die - Progressive die

2:Mass production - Metal press - Thickness: 0.2 mm - 3.2mm

3:Mass production - Metal press - Combined press-joining

4:Mass production - Metal press - Thickness: below 0.2 mm

5:Mass production - Metal press - Progressive press (35 - 80 t)

6:Mass production - Metal press - Copper

7:Mass production - Metal press - Phosphor bronze

8:Mass production - Metal press - Brass

9:Mass production - Metal press - Stainless steel

10:Designing - Mold designing - General metal press die

58.

Yuwa Co., Ltd. Location:  Nagano  Komoro 700-1 Nishibara Employees 210

Yuwa Co., Ltd. Deals with the production of connector parts, camera parts, LCD parts, fine precision molded parts for automobiles, and medical equipment, and the like, and is used in the ever-evolving...

Main 3 products Mold design/manufacturing for plastic  Plastic molding processing  Ultra-precision molding
Type of manufacturing Telecommunication equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Plastic - Injection molding

2:Mass production - Plastic - Insert molding

3:Mass production - Plastic - Below 60 t

4:Mass production - Plastic - 60 - 300 t

5:Mass production - Plastic - LCP (liquid crystal polymer)

6:Mass production - Plastic - PPS (polyphenylene sulfide)

7:Mass production - Plastic - General-purpose material

8:Mass production - Plastic - Engineering plastic

9:Mass production - Plastic - PVC (polyvinyl chloride)

10:Mass production - Plastic - Thin wall molding

59.

Ito Seisakusho Co., Ltd. Location:  Mie  Yokkaichi 101 Hironaga-cho Employees 102

Since our company was established, we have developed our business as a pioneer in progressive mold design and manufacture and press parts processing for automobile parts. 95% of our products are autom...

20% plate thickness drilling and hole machining

Material: SPH270C / Plate thickness: 6.0 mm / Hole diameter: 1.2. We can perform drilling with press stamping. By putting them inside progressive molds, we can drastically reduce costs. Special Characteristics 1. Production with hole machining precision of plus/minus 0.01 mm made possible 2. Shear surface length 80% or more 3. As for burrs, fracture surface molding nearly like burr removal of the same chamfer surface Material: SPHC Plate Thickness: 6.0 mm Hole Diameter: 1.2

Main 3 products Progressive mold designing  Progressive mold manufacturing  Progressive press stamping / cold forging
Type of manufacturing Transportation equipment  Electronic parts  Office automation equipment
Recommended manufacturing category

1:Mass production - Metal press - Progressive press (200 - 500 t)

2:Designing - Mold designing - Progressive die designing (auto)

3:Die manufacturing - Press die - Progressive die

4:Designing - Mold designing - Progressive die designing (light electrical)

5:Die manufacturing - Press die - Blanking die

6:Designing - Mold designing - NC data creation (press)

7:Mass production - Metal press - Progressive press (80 - 200 t)

8:Mass production - Metal press - Progressive press (35 - 80 t)

9:Die manufacturing - Press die - Die set machining

10:Designing - Mold designing - General metal press die

60.

DEGAWA CORPORATION Location:  Kanagawa  Fujisawa City 5-3-7 Fujisawa Employees 40

☆ We handle jigs and precision parts from small lots to mass production ☆ [Business description] ・Various jigs manufacture (inspection jigs, assembly jigs, clamping jigs, jig parts) ・Machine tool...

Chuck arm, S50C, milling, machine parts

[We provide quick service! Machining/cutting] S50C 26.5X89X6 Chuck arm for machine equipment ▼Material Iron S50C ▼Size 26.5X89X6   ▼Processing method Machining ▼Accuracy Pitch/hole diameter: ±0.02 ▼Lot About 1 to 10 pieces/month *We specialize in single items and small quantities. ▼Processing days About 10 days *Please contact us as it varies depending on the shape and production status. ▼Industry Machine equipment ▼Product name Chuck arm ▼Features The photo shows example of machining process. These are parts for machine equipment. We ask partner companies for material procurement to surface treatment such as plating to provide integrated production. Processing period for this item is around 10 days. ▼Others We handle urgent orders. We mainly handle single items. Please contact us regarding materials such as resin, steel, and stainless steel. ==================== DEGAWA CORPORATION https://www.degawa.jp Fujisawa Plant 5-3-7 Fujisawa, Fujisawa City, Kanagawa Prefecture 251-0052 Nihonmatsu Factory 82-8 Miyato, Nihonmatsu City, Fukushima Prefecture 964-0811 ★Contact Nihonmatsu factory for inquiries★ TEL: +81-243-22-2474 FAX: +81-243-22-1543 Person in charge: Takamichi Saito ====================

Main 3 products Manufacture of "Pipe Slider"    
Type of manufacturing Jigs and tools  Industrial machinery  Transportation equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

2:Development and production of prototype/Small-scale production - Jig manufacturing - Mass production jig manufacturing

3:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing

4:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

5:Development and production of prototype/Small-scale production - NC machining - NC lathe machining

6:Development and production of prototype/Small-scale production - Machining - Lathe machining (resin)

51-60 / 2076 hits

New registration