1-10 / 1894 hits
"Proposal of camera cleaning unit for automobiles Small DC pump (micropump mechanism / structural design) / housing molding / assembly ① ADAS driving support & security Back monitor parts for driving support system ② Small DC pumps (micro pumps) are proposed from the mechanical and structural design and produced at our factory. ③ Some of the resin molded products, (including housing molding) are produced at our factory. Features High flow rate, high pressure, optimal unit design (1) Achieve cleaning power with high flow rate and high pressure. (2) Further noise reducing and vibration by designing the mechanism and structure of the unit. Application Automobile parts, cleaning pump unit for back monitor For cleaning camera lenses Improve monitor visibility * We will respond promptly to inquiries □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ TADA PLASTIC INDUSTRIAL CO.,LTD. 2-12-8, Tsudo, Fujiidera Shi, Osaka, Japan 583-0037 TEL:0081-729540981 http://www.tadapla.co.jp Ideas and technology that lead to innovation Fusion technology Injection molding Urethane foam Micro pump Precision rubber molding □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□
Main 3 products | Compact DC pump Injection molding Urethane foam |
---|---|
Type of manufacturing | Transportation equipment Electronic parts Medical equipment |
Recommended manufacturing category |
1:Mass production - Plastic - PU (polyurethane) 2:Mass production - Plastic - Expansion molding 3:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 4:Mass production - Plastic - Gas injection 5:Mass production - Plastic - Injection molding 6:Mass production - Plastic - 60 - 300 t 7:Mass production - Plastic - PPS (polyphenylene sulfide) 8:Mass production - Plastic - CFRP (carbon fiber reinforced plastic) 9:Mass production - Plastic - PBT (polybutylene terephthalate) 10:Mass production - Plastic - Elastomer |
Nursing Aid, “Hasameru (はさめーる),” developed from a general purpose plastic (pp). As shown in the picture, simply hold the grip lightly and holding chopsticks become easy. It also can be used as a potholder, in other words, can be used while deep frying. Not only for those whom are handicapped, but also it is a great practice tool for those who never used chopsticks as well. It is easy to attach and remove. Try it with your favorite chopsticks. Method:Injection Molding Material:polypropylene(PP) For ordering, please access below link. http://www.daiwa-pls.co.jp/fukushi/index.html (Osaka)
Main 3 products | Automobile Parts (Thermosetting Resin Pulley) Heavy Electronic Industrial Machinery Parts (Breaker Parts) Composite Molding with Metals |
---|---|
Type of manufacturing | Heavy electric machinery Industrial machinery Transportation equipment |
Recommended manufacturing category |
1:Mass production - Plastic - Thermoset resin 2:Mass production - Plastic - Insert molding 3:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 4:Mass production - Plastic - Injection molding 5:Mass production - Plastic - Engineering plastic 6:Mass production - Plastic - Compaction moldingicompression, direct pressurej 7:Mass production - Plastic - Rotational/Slash/Dip molding 8:Mass production - Plastic - PPS (polyphenylene sulfide) 9:Mass production - Plastic - General-purpose material 10:Mass production - Plastic - Thin wall molding |
Main 3 products | Mold design/manufacturing for plastic Plastic molding processing Ultra-precision molding |
---|---|
Type of manufacturing | Telecommunication equipment Electronic parts Medical equipment |
Recommended manufacturing category |
1:Mass production - Plastic - Injection molding 2:Mass production - Plastic - Insert molding 3:Mass production - Plastic - Below 60 t 4:Mass production - Plastic - 60 - 300 t 5:Mass production - Plastic - LCP (liquid crystal polymer) 6:Mass production - Plastic - PPS (polyphenylene sulfide) 7:Mass production - Plastic - General-purpose material 8:Mass production - Plastic - Engineering plastic 9:Mass production - Plastic - PVC (polyvinyl chloride) 10:Mass production - Plastic - Thin wall molding |
Main 3 products | Sube-up HP filament (super flexible) Silicone trims |
---|---|
Type of manufacturing | Transportation equipment Construction material Industrial machinery |
Recommended manufacturing category |
1:Mass production - Plastic - Extrusion molding 2:Mass production - Plastic - Special shape extrusion molding 3:Mass production - Plastic - Dual molding 4:Mass production - Plastic - Handles small-scale production 5:Mass production - Plastic - Insert molding 6:Mass production - Plastic - PEEK (polyetheretherketone) 7:Mass production - Plastic - Elastomer |
This is a connector part for PCs and tablets made of LCP. This is a plastic molded product with a size of 12.0 x 1.4 x 0.63 mm and tolerance range of 0.01 mm. We manufacture 60 poles (30 poles x 2 rows with 12 mm width) in molded product using a split die in consideration of liquidity. The tip has complicated shape, and the mold is designed and manufactured not only for accuracy but also for easy filling of resin. By adopting Yamaichi Seiko's original side gate, post-processing is not required, which leads to reduction of man-hours, cost reduction and stable quality (solving the problem of gate cut defects in the post-process). ◆ Product details Product name: connector parts for consumer use Industry: Electronic components (for PCs and tablets) Material: LCP (Liquid Crystal Polymer Super Engineering Plastic) Size: 12.0 x 1.4 x 0.63 mm Dimensional accuracy: 0.01mm ◆ PR Yamaichi Seiko Co., Ltd. provides integrated manufacturing of fine and precision plastic injection molded products by reliable mold processing technology to meet micron orders. We can handle design / manufacturing / maintenance of precision mold, mold parts and mechanical parts manufacturing, precision injection molded product manufacturing, molded products assembly to measurement contract, measuring jigs manufacturing, and flow analysis. We are equipped with a line that can stably produce and supply about 300 to 350 million injection molded products in Japan and overseas. We have about 300 injection molding machines (including the group) of 5t to 100t. We manufacture connectors, camera modules, industrial machinery and medical equipment parts, focusing on in-vehicle parts and electronic parts. We can handle fine and precision molded products from weight of 0.00006g up to the size of the hand palm. Production bases are in Japan (Ishikawa and Kyoto Prefecture), China (Dalian, Dongguan), the Philippines and Thailand (group companies) that covers Japan, East Asia, and Southeast Asia. All factories have acquired ISO 9001 and ISO 14001. IATF 16949 will be acquired in early 2023. Yamaichi Seiko Co., Ltd. 〒920-8203 5-177 Kuratsuki, Kanazawa City, Ishikawa Prefecture AUBEⅡ 3rd floor TEL: 076-237-1110 / FAX: 076-237-1120 http://www.yama-s.co.jp/top.html
Main 3 products | Ultra-precision plastic injection molding mold Ultra-precision plastic molded product Plastic molded product assembly |
---|---|
Type of manufacturing | Industrial machinery Telecommunication equipment Electronic parts |
Recommended manufacturing category |
1:Mass production - Plastic - Injection molding 2:Mass production - Plastic - Thin wall molding 3:Mass production - Plastic - LCP (liquid crystal polymer) 4:Mass production - Plastic - PPS (polyphenylene sulfide) 5:Mass production - Plastic - PBT (polybutylene terephthalate) 6:Mass production - Plastic - PI (polyimide) 7:Mass production - Plastic - Engineering plastic |
ROSLIMBOARD H is a low thermal conductivity heat-insulation material and exhibits high performance, thus saving energy and space for equipment. ・Size of Blank Material Thickness : 25, 50mm Length X Width : 600X900 mm ・Applications Heat (Thermal) insulation material for industrial furnace (backup material) Heat (Thermal) insulation material for combustion equipment Heat (Thermal) insulation material for melting and holding furnace
Main 3 products | Heat insulation(thermal insulation) and heat resistant materials (rigid heat insulation boards that are generally made of glass fiber, cement and mica as the main raw material) Composite of glass fiber or carbon fiber and plastics (FRP, GFRP and CFRP). Fine ceramics |
---|---|
Type of manufacturing | Industrial machinery Electronic parts Transportation equipment |
Recommended manufacturing category |
1:Mass production - Plastic - FRP (fiber reinforced plastic) 2:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 3:Mass production - Plastic - CFRP (carbon fiber reinforced plastic) 4:Mass production - Plastic - Thermoset resin 5:Mass production - Plastic - EP (epoxy) 6:Development and production of prototype/Small-scale production - Machining - Machining (resin) 7:Development and production of prototype/Small-scale production - Machining - Lathe machining (resin) 8:Material - Plastic material distribution - PF (phenol-formaldehyde) 9:Development and production of prototype/Small-scale production - Machining - Ceramic 10:Material - Specialized material distribution - Ceramic material |
Although it is an extruded product of ABS, it is a transparent molding. Extrusion molding of transparent products is difficult to manage because it is difficult to mix foreign substances. Our company has high management technology and can make such transparent extruded products. We can respond to lot numbers and tolerances according to customer requests. We can provide various transparent parts such as optical transparent parts, slightly dull transparent parts, and clear transparent parts.
Main 3 products | |
---|---|
Type of manufacturing | Home electrical appliances Construction material Stationery products |
Recommended manufacturing category |
1:Mass production - Plastic - Extrusion molding 2:Mass production - Plastic - Dual molding 3:Mass production - Plastic - Special shape extrusion molding 4:Mass production - Plastic - Tube extrusion molding 5:Mass production - Plastic - Pipe extrusion molding 6:Mass production - Plastic - PVC (polyvinyl chloride) 7:Mass production - Plastic - General-purpose material |
As a plastic magnet molding manufacturer, we produce distinctive, highly functional products. We manufacture motor parts, using both the two-color injection molding technology with plastic magnets and engineering plastics, and the integral injection molding technology including the shaft parts. In addition, our range of accurate multi-polarized magnet products, with a minimum magnetizing pitch of 40 μ, are used as sensors, motors, and meter magnets for rotary encoder magnets and linear encoder magnets.
Main 3 products | Automotive control panels Plastic magnets Writing materials |
---|---|
Type of manufacturing | Electronic parts Electrical component for transportation equipment Stationery products |
Recommended manufacturing category |
1:Mass production - Plastic - Plastic magnet molding 2:Mass production - Plastic - Dual molding 3:Mass production - Plastic - Injection molding 4:Mass production - Plastic - Thin wall molding 5:Designing - Mold designing - Injection molding die 6:Die manufacturing - Plastic mold - Manufacturing 7:Die manufacturing - Plastic mold - Part processing |
We can perform insert molding of film insert molds and decorative film molds using insert molding dies. We can handle everything from printing to die production and molding.
Main 3 products | Vacuum molds Air pressure molds Film insert molding |
---|---|
Type of manufacturing | Industrial machinery Electronic parts Transportation equipment |
Recommended manufacturing category |
1:Mass production - Plastic - Vacuum molding 2:Mass production - Plastic - Air pressure molding 3:Mass production - Plastic - Insert molding 4:Surface treatment - Printing and others - Silk (handles curved surface) 5:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining 6:Development and production of prototype/Small-scale production - Prototype processing - Chassis prototype manufacturing 7:Assembly/Inspection - Inspection - Plastic 8:Surface treatment - Printing and others - Silk screen printing 9:Development and production of prototype/Small-scale production - Machining - Simultaneous 5-axis machining 10:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing |
Main 3 products | TPO extrusion products (construction and civil engineering parts, automotive parts) PVC extruded products (construction and civil engineering parts, automotive parts) Composite extrusion products, etc. (construction and civil engineering parts, automotive parts) |
---|---|
Type of manufacturing | Not selected Construction material Transportation equipment |
Recommended manufacturing category |
1:Mass production - Plastic - Extrusion molding 2:Mass production - Plastic - Special shape extrusion molding 3:Mass production - Plastic - Handles small-scale production 4:Product manufacturing - Construction and civil engineering machinery manufacturing - Construction and civil engineering material manufacturing 5:Mass production - Rubber - Tire, wheel, and other auto parts 6:Mass production - Rubber - Packing-related products 7:Mass production - Rubber - Weather-ability |
1-10 / 1894 hits