11-20 / 1122 hits
"Proposal of camera cleaning unit for automobiles Small DC pump (micropump mechanism / structural design) / housing molding / assembly ① ADAS driving support & security Back monitor parts for driving support system ② Small DC pumps (micro pumps) are proposed from the mechanical and structural design and produced at our factory. ③ Some of the resin molded products, (including housing molding) are produced at our factory. Features High flow rate, high pressure, optimal unit design (1) Achieve cleaning power with high flow rate and high pressure. (2) Further noise reducing and vibration by designing the mechanism and structure of the unit. Application Automobile parts, cleaning pump unit for back monitor For cleaning camera lenses Improve monitor visibility * We will respond promptly to inquiries □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ TADA PLASTIC INDUSTRIAL CO.,LTD. 2-12-8, Tsudo, Fujiidera Shi, Osaka, Japan 583-0037 TEL:0081-729540981 http://www.tadapla.co.jp Ideas and technology that lead to innovation Fusion technology Injection molding Urethane foam Micro pump Precision rubber molding □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□
Main 3 products | Compact DC pump Injection molding Urethane foam |
---|---|
Type of manufacturing | Transportation equipment Electronic parts Medical equipment |
Recommended manufacturing category |
1:Mass production - Plastic - PU (polyurethane) 2:Mass production - Plastic - Expansion molding 3:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 4:Mass production - Plastic - Gas injection 5:Mass production - Plastic - Injection molding 6:Mass production - Plastic - 60 - 300 t 7:Mass production - Plastic - PPS (polyphenylene sulfide) 8:Mass production - Plastic - CFRP (carbon fiber reinforced plastic) 9:Mass production - Plastic - PBT (polybutylene terephthalate) 10:Mass production - Plastic - Elastomer |
<<Small four-sided pyramids fabricated by Profile grinder>> We made small four-sided pyramids by Profile grinder. In order to realize smart mobility including autonomous driving, various electronic parts related to autonomous driving are required. At our company, we are involved in the design and production of the molds, devices, jigs and tools that are necessary to manufacture these electronic components. Please feel free to contact us when manufacturing electronic parts such as automatic driving. Material : STAVAX (Stainless steel X30Cr13 similar) 52±1 HRC Width of pyramid : 0.1mm Height of pyramid : 0.25mm Tolerance : ±0.002mm If you need a high precision and skall products, please contact us! <For inquiries, please contact here> Headquarter Sales Department TEL: +81-143-55-5293 FAX: +81-143-55-5295 sales@chimera.co.jp
Main 3 products | Molding (plastic) dies, press dies, various mold components processing, precision metal machining [design, manufacture, testing] In order to meet needs for quick delivery, we stock various die materials such as NAK, SKS, SKD, high speed steel and ultra-hard materials. With our high speed cutting machining center, |
---|---|
Type of manufacturing | Audio-video equipment Office automation equipment Electronic parts |
Recommended manufacturing category |
1:Die manufacturing - Plastic mold - Part processing 2:Designing - Mold designing - Injection molding die 3:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining 4:Development and production of prototype/Small-scale production - Grinding processing - Jig boring 5:Development and production of prototype/Small-scale production - Grinding processing - Jig grinding 6:Die manufacturing - Press die - Plate machining 7:Die manufacturing - Press die - Die set machining 8:Die manufacturing - Plastic mold - Core and cavity machining 9:Die manufacturing - Plastic mold - Thin wall injection molding die 10:Die manufacturing - Plastic mold - Cassette-type molding die |
Material: HDPE (High Density Polyethylene) Work: Injection molding Shape / size: 95mm x 58mm Industry / Part Name: Automotive Industry Equipment name: Horizontal injection molding machine 110t Functionality: High rigidity, impact resistance, water resistance, chemical resistance, insulation Details of improvement: Resin replacement Response: Small lot, trial production, mass production Remarks: A part for connecting resin fuel filler pipes for automobiles (near the fuel filler port).
Main 3 products | Precision plastic molding mold Precision plastic molded products Small injection molding machine |
---|---|
Type of manufacturing | Industrial machinery Electronic parts Medical equipment |
Recommended manufacturing category |
1:Mass production - Plastic - Thin wall molding 2:Die manufacturing - Plastic mold - Thin wall injection molding die 3:Die manufacturing - Plastic mold - Injection molding die 4:Designing - Mold designing - Injection molding die 5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing 6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 7:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding |
An automatic compression and extension spring testing machine. Up to 100N can be measured.
Main 3 products | Compression springs Tension Springs Torsion Springs |
---|---|
Type of manufacturing | Industrial machinery Transportation equipment Medical equipment |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 2:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 3:Parts manufacturing - Spring - Compression coil spring 4:Parts manufacturing - Spring - Torsion spring 5:Parts manufacturing - Spring - Formed wire spring 6:Development and production of prototype/Small-scale production - Prototype processing - Bending 7:Parts manufacturing - Spring - Double torsion spring 8:Parts manufacturing - Spring - Tensil coil spring 9:Mass production - Grinding processing - Double-sided grinding 10:Die manufacturing - Spring mold - Designing |
We collaborated with three general hospitals in Japan to develop this disinfection dispenser 【FUMIFUMI SHUSSHU】. 【FUMIFUMI SHUSSHU】, which began selling in February 2022 is utilized by many hospitals, medical facilities, and enterprises. It is available in our online store. ―――――――Features――――――― With the thought that 「children can use it safely and with peace of mind」 We have 2 types: ・Size according to children's height ・General size Disinfectant dispenser 【FUMIFUMI SHUSSHU】 is ・No power supply required ・Non-contact ・Capacity 5 liters ・High stability You may check the product details in our online store link below: https://yoshida-0nline.stores.jp/ If you have any questions, please contact us from the page below: https://yoshida-0nline.stores.jp/inquiry
Main 3 products | Alumi parts for 4 wheels brake Alumi parts for construction machine Alumi RP parts for prototype |
---|---|
Type of manufacturing | Heavy electric machinery Industrial machinery Transportation equipment |
Recommended manufacturing category |
1:Mass production - Casting - Gravity casting 2:Mass production - Mechanical processing - NC turning machining 3:Designing - Mold designing - Casting die designing 5:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing 6:Mass production - Casting - Sand casting 7:Development and production of prototype/Small-scale production - Prototype processing - Aluminum die-casting 8:Designing - Simulation - Casting 9:Mass production - Mechanical processing - Machining 10:Die manufacturing - Casting die - Wooden model |
Aluminum die casting [Automotive parts, 2-wheel parts, general parts and office machine parts, etc.] ◆ Features The most commonly used die casting is aluminum alloy. This light and strong alloy has excellent corrosion resistant properties and is widely used in applications for various fields. ◆ Iwaki Diecast’s aluminum die casting production system We use a launder system, which enables us to always supply clean raw materials, when feeding the molten metal from the melting furnace to the holding furnace. The scrap material, which is generated during trimming, is returned to the melting furnace via an underground conveyor. Our casting equipment is automated featuring a unique manufacturing method that is both highly productive and very safe. It produces a smooth surface with a minimal number of blowholes. ◆ Melting process • Our melting is centralized with high thermal efficiency. • The molten metal is poured into the holding furnace using launders (troughs) and porters. • We supply clean molten metal with minimal temperature difference by using an electric furnace. ◆ Casting process • Our own automated and systematized facilities enable us to automate processes up to the separation of gates. • Our die temperature control enables us to make products of consistent quality. • Our management system CAMOS allows us to visually monitor the production status. ◆ Main usages Automotive parts, 2-wheel parts, general parts and office machine parts, etc.
Main 3 products | Aluminum and zinc die cast products Ultra-high speed and precise zinc die cast products using special die casting constructions Iron and stainless steel injection molded parts…MIM (Metal Injection Molding) |
---|---|
Type of manufacturing | Not selected |
Recommended manufacturing category |
1:Mass production - Plastic - Metal injection molding (MIM) 2:Mass production - Casting - Metal injection molding (MIM) 4:Mass production - Die-casting - Aluminum 5:Mass production - Casting - Cast steel 6:Designing - Mold designing - Casting die designing 7:Surface treatment - Plating/Chemical conversion treatment - Zinc die-cast 8:Die manufacturing - Casting die - 3D modeling 9:Mass production - Die-casting - 125 t or less 10:Mass production - Die-casting - 125 - 250 t |
Spout Industry: Food-related industry Resin used: PP Gate: Hot runner valve pin (Seiki Corporation) After finishing the processing of the mold base, we asked Seiki Corporation to incorporate it, then we incorporate hot runner. As shown in the picture, there are many wires due to many valve pins. It's hard to handle it in a very narrow place, but since we were used to it, we completed it in one day. [PR] ◇ Miyuki's main track record ・ Production of more than 5,000 molds for injection molding ・ Blow molding, pressure forming, in-mold molding, insert molding, and other various mold manufacturing ◇ Specialty field ・ Unscrewing multi-cavity mold for food, pharmaceuticals, cosmetics, etc. ・ multi-cavity hot runner molds ・ General-purpose resin such as PP and PE ・ Engineering plastics and super engineering plastics such as PA, POM, PPS ・ Molds for super engineering plastics molding with complicated mechanisms such as automotive and semiconductors ・and others ◇ Other capabilities ・ We also provide mold maintenance and repair made by other companies. ・ Please feel free to contact us if you have any problems with the mold, such as want to change the design but have no drawing. ◇ Company information 285 Arayashiki, Takaoka City, Toyama Prefecture 933-0319 MIYUKI CO.,LTD TEL: 0766-31-0646 FAX: 0766-31-0647
Main 3 products | Hot runner mold, high cycle mold, multi-cavity mold, high durability injection molding mold Mold for injection molding of super engineering plastics such as PPS&fluorine, mold for insert molding Prototype, small lot molding, precision parts and jigs and tools production |
---|---|
Type of manufacturing | Transportation equipment Medical equipment Stationery products |
Recommended manufacturing category |
1:Die manufacturing - Plastic mold - Injection molding die 2:Die manufacturing - Plastic mold - Insert molding die 3:Die manufacturing - Plastic mold - Thermoset resin die 4:Die manufacturing - Plastic mold - Blow molding die 5:Die manufacturing - Plastic mold - Vacuum/Air pressure molding die 6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 7:Mass production - Plastic - Injection molding 8:Development and production of prototype/Small-scale production - Prototype processing - Small-lot/Injection molding 9:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding 10:Assembly/Inspection - Repair - Die repair |
This guide is used for equipment parts in automotive parts plants. The material is SKD11 and holds HRC61-63. The important precision parts (with a 1° taper at the tip) are smoothly connected with RZ3.2 by lathing, machining→ hardening→ cylindrical grinding and profile grinding. The surface treatment is hard chrome, maintaining a hardness of about Hv900, and providing abrasion resistance and long life.
Main 3 products | Precision parts processing for automotive devices Processing for ultra-mirror finishing Prototype manufacturing |
---|---|
Type of manufacturing | Jigs and tools Industrial machinery Machine tools |
Recommended manufacturing category |
1:Surface treatment - Lap polishing - Lap polishing 2:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 3:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 4:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining 5:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical grinding 6:Development and production of prototype/Small-scale production - Grinding processing - Plane grinding 7:Development and production of prototype/Small-scale production - Machining - General-purpose milling 8:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical mirror grinding 9:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing 10:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) |
Ceramics Processing, Component Arrangement, and Assembly! CE-RISE's manufacturing service Ceramic prototypes and ceramic products can be made from a single piece in as little as 5 days without molds (custom-made products are also available). (We can also handle custom-made products.) We can handle everything from small quantities to mass production. From drawing to quotation in 3 hours. Our skilled engineers manufacture ceramic parts with high hardness, heat resistance, corrosion resistance, and electrical insulation to support your manufacturing. Materials Combination of ceramics, resin, metal, glass, etc. Industries and Applications Medical equipment Machining】 Design + Ordering + Machining + Assembly Design + Ordering + Processing + Assembly Features CE-RISE can solve your current problems! Ceramics processing, parts arrangement, and assembly are available! One-stop service for all processes up to assembly! We deliver careful and accurate products with pride of Made in Japan. If you have any questions or concerns, please feel free to contact us. https://ceramic.co.jp/ Click here for inquiry form ↘↘ (click for details button 👇🏻) 📞TEL: 03-3755-0660
Main 3 products | Ceramic Products Mass Production, prototype, manufacturing |
---|---|
Type of manufacturing | Machine tools Medical equipment Lighting equipment |
Recommended manufacturing category |
1:Mass production - Mechanical processing - Machining 2:Mass production - Grinding processing - Plane grinding 3:Mass production - Grinding processing - Cylindrical grinding 4:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing 5:Die manufacturing - Powder metallurgy mold - Metal die 6:Mass production - Mechanical processing - NC turning machining 7:Surface treatment - Other surface treatment - Shot blast 8:Mass production - Mechanical processing - NC milling machining 9:Development and production of prototype/Small-scale production - Jig manufacturing - Jig and tool manufacturing 10:Development and production of prototype/Small-scale production - Machining - Ceramic |
Ferrite shape processing (M2 + O ・ Fe203) ◆ Material ◆ ・ Soft ferrite ・ Hard ferrite ◆ Usage ◆ ・ Electrical parts ・ Home appliances ・ In-vehicle parts ◆ Dimensions ◆ It is possible to process to the micron unit. ◆ Processing method ◆ ・ Vertical processing machine ・ Surface grinding processing ・ Machining ・ Outer circumference slicer ・ Inner circumference slicer We will handle everything from material cutting, processing to inspection. We manufacture our own original jigs and tools and process various shapes to meet the needs of our customers. If you have a request for processing, please contact us. Yashima Kobayashi Industry Co., Ltd. Headquarters Factory 〒015-0411 429 Okikoda, Yashimamachi Jonai, Yurihonjo City, Akita Prefecture TEL: 0184-56-2637 FAX: 0184-56-2779 Person in charge : Naoko Tsuchida
Main 3 products | Magnetic materials,ceramics Machine parts,jigs and tools medical device |
---|---|
Type of manufacturing | Machine tools Industrial machinery Electronic parts |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Machining - Ceramic 2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 3:Development and production of prototype/Small-scale production - NC machining - Machining (horizontal) 4:Mass production - Mechanical processing - NC turning machining 5:Development and production of prototype/Small-scale production - Machining - Stainless steel 6:Surface treatment - Lap polishing - Dual-face lapping and polishing 7:Surface treatment - Lap polishing - Lap mirror polishing 8:Mass production - Mechanical processing - Automatic screw machining 9:Development and production of prototype/Small-scale production - Machining - Aluminum alloy 10:Development and production of prototype/Small-scale production - Machining - Iron |
11-20 / 1122 hits