31-40 / 1060 hits
LGU35 series Outer Diameter: 35mm Reduction Ratio: 4~5 Material: Machined Metal / Sintered Metal / Plastic Input Shape: D cut Hole / Spur Gear Shaft / Serration Shaft Output Shape: Spur Gear Hole / Serration Hole This model is good for applications with low torque and space-saving requirements: - Automobiles - Home Electric Appliances - Hand-held Electric Tools - Household shutter open/close devices - Small Automatic Doors - Low-precision Robots and so on
Main 3 products | Planetary Gear Reducer/Increaser Electric Actuator Mold Clamp |
---|---|
Type of manufacturing | Jigs and tools Industrial machinery Home electrical appliances |
Recommended manufacturing category |
1:Designing - Product and part designing - Gear designing 2:Parts manufacturing - Machinery part - Gear manufacturing 3:Mass production - Plastic - Injection molding 4:Development and production of prototype/Small-scale production - Machining - Gear hobber 5:Mass production - Mechanical processing - NC turning machining 6:Mass production - Mechanical processing - Broaching machining 7:Mass production - Mechanical processing - Sintered metal |
FSW bonding process for inverter power module Manufacturing by fully automatic robot transfer line Leak tests, dimensional inspections, etc. are performed inline.
Main 3 products | Automobile parts |
---|---|
Type of manufacturing | Electronic parts Transportation equipment Electrical component for transportation equipment |
Recommended manufacturing category |
Usage: Contact points for hand-held chargers Material: C1720-1 / 2H Plate thickness: 0.15 mm Progressive Die Minimize contact burr. Since 3 pieces are installed in parallel (using 3 pieces), the heights of the contact parts must be the same. Dimensional accuracy is required despite the complicated bending
Main 3 products | Precision progressive die design and manufacture Precision stamping Various single-shot mold design and production |
---|---|
Type of manufacturing | Telecommunication equipment Electronic parts Medical equipment |
Recommended manufacturing category |
1:Die manufacturing - Press die - Progressive die 2:Mass production - Metal press - Progressive press (35 - 80 t) 3:Mass production - Metal press - Single press (below 80 t) 4:Designing - Mold designing - General metal press die 5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 6:Die manufacturing - Press die - Manufacturing 7:Die manufacturing - Press die - Designing 8:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining 9:Mass production - Metal press - Stainless steel 10:Mass production - Metal press - Thickness: below 0.2 mm |
Main 3 products | Special metal / pure copper Copper alloy Rare metal |
---|---|
Type of manufacturing | Not selected |
Recommended manufacturing category |
1:Material - Nonferrous metal distribution - Copper and brass products 2:Material - Specialized material distribution - Molybdenum alloy 3:Material - Steel component distribution - Stainless steel 4:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 5:Development and production of prototype/Small-scale production - Sheet-metal processing - Can manufacturing 6:Development and production of prototype/Small-scale production - Jig manufacturing - Jig and tool manufacturing 7:Mass production - Plastic - Engineering plastic |
Simple shapes, extraordinary precision. Making a difference with part manufacturing that pursues uniformity. Overview Our company specializes in the production of parts that, while simple in shape, require uniformity in height and diameter. To achieve this uniformity, we use specially designed molds that incorporate unique innovations. Based on EX-GO trading conditions, we provide flexible payment and logistics options, tailoring our services to meet our customers' needs. We are committed to technology and innovation to enhance the consistency of quality and the reliability of our products. Features Advanced Mold Technology: Our molds are specially designed to ensure the uniformity of parts' height and diameter. This technology significantly improves the quality and consistency of our products. Consistency in Quality: Our production process focuses on maintaining the quality of parts consistently from start to finish. This ensures that our customers receive the expected product every time. Flexible Payment and Logistics Conditions: By adopting EX-GO trading conditions, we offer the most suitable payment and logistics options for our customers, supporting smooth transactions. Specifications Using special molds allows us to achieve a high level of uniformity in height and diameter, even for parts that are simple in shape. This precision contributes not only to the mechanical properties but also to the visual consistency, directly affecting the improvement of the final product's quality. Our manufacturing process aims to deliver quality that exceeds our customers' expectations.
Main 3 products | Progressive / single press processing Press mold design and manufacturing Design and manufacture of various jigs and parts |
---|---|
Type of manufacturing | Home electrical appliances Telecommunication equipment Electronic parts |
Recommended manufacturing category |
We services about robot welding of industrial, Maintenance and repair of robot, Installation robot and machine, PLC system and touch panel, Electronic, Teaching program of robot welding, Training course of basic operation and welding course of robot. Electrical and System engineering Robot Service Education Rental Robot
Main 3 products | PLC program and wiring electrical of machine Robot Installation/ Maintenance/ Repair Teaching program robot |
---|---|
Type of manufacturing | Industrial machinery Measuring machinery Machine tools |
Recommended manufacturing category |
The Busbar is made of copper alloy with a copper ratio of > 99.95%. The outside can have a surface treatment layer of nickel (Ni), tin (Sn) or other alloys that create good corrosion resistance when working in acidic environments. Some Busbars are covered with PVC or PE to provide insulation when working in environments that require electrical safety. Depending on customer requirements, Shogo can produce solid copper busbars or flexible busbars. Solid copper busbars are made from copper bars or shaped copper sheets, which has the advantage of being able to withstand its own weight and increase heat resistance when working. Flexible busbars are made by laminating many thin layers of copper foil and connecting them together, so they have the advantage of working well when expanded by working temperature, under impact when moving and in difficult areas. Difficulty in assembly.
Main 3 products | Car electrical busbar HV electrical wire - Cable Car accessories |
---|---|
Type of manufacturing | Heavy electric machinery Jigs and tools Electrical component for transportation equipment |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Blank cutting - CO2 laser machining |
仕様(寸法、機能等) 外径はφ90。穴径は0.4mm、1mm、2mmの細穴を56箇所加工。長穴はφ2mm深さ30mm。 2液性液体ロケットエンジンを想定したサンプルです。
Main 3 products | Prototypes and mass production of aerospace components Prototypes and mass production of medical device parts Design and manufacture of satellite housings and satellite engine test benches |
---|---|
Type of manufacturing | Electronic parts Transportation equipment Medical equipment |
Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining |
Main 3 products | Press materials Consumables for mass production of presses Steel for dies |
---|---|
Type of manufacturing | Electrical component for transportation equipment Home electrical appliances Electronic parts |
Recommended manufacturing category |
1:Die manufacturing - Press die - Progressive die |
Products are manufactured on an automated production line.
Main 3 products | Platics products Injection Platics |
---|---|
Type of manufacturing | Not selected |
Recommended manufacturing category |
1:Mass production - Plastic - Injection molding |
31-40 / 1060 hits