1-10 / 411 hits

1.

Plamoul Seiko Co.,Ltd. Location:  Miyagi  Tomiya City 4-3-5 Takanomori Employees 42

“The Degassing Revolution: Unbelievable Degassing. Better Quality and Reduced Cost.” Have you ever faced with a problem during conservation of injection moulds and/or cast moulds due to poor degass...

“Gas-tosu” (Registered trade name), Ejector-Pin, Core-Pin with gas-venting function

“Gas-tosu,” Ejector-Pin, Core-Pin with gas-venting function "Gas-tosu" is a registered trade name. "tosu" is a Japanese word, and it means making something pass. Therefore, "Gas-tosu" is the tool which makes gas pass. ◆The features of Gas-tosu Gas-tosu is used as Ejector-pin or Core-pin with gas-venting (air-venting) function. The vent width in Gas-tosu can be selected from 0.005~0.05mm according to the fluidity of resin. Therefore, Gas-tosu is acceptable to every kinds of resin. The inclined-processing is being performed into Gas-tosu to efficiently exhaust the gas which occurs in die. Installing the gas vent with the width which is 0.005~0.05mm is possible according to the fluidity of resin.

Main 3 products Spool, Runner parts, ejector pin ,  Connector parts  
Type of manufacturing Not selected  Jigs and tools  Electronic parts
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Part processing

2:Die manufacturing - Plastic mold - Designing

3:Die manufacturing - Plastic mold - Manufacturing

4:Designing - Mold designing - Injection molding die

5:Die manufacturing - Plastic mold - Injection molding die

6:Material - Plastic material distribution - ABS resin

7:Material - Plastic material distribution - PP (polypropylene)

8:Material - Plastic material distribution - PC (polycarbonate)

9:Material - Plastic material distribution - POM (polyoxymethylene)

10:Die manufacturing - Plastic mold - Thermoset resin die

2.

Matsuba Giken Kogyo Co., Ltd. Location:  Osaka  Osaka-shi, Hirano-ku Kamihigashi 1-13-46 Employees 26

In our semi-clean room production facilities, we constantly innovate and improve to minimize costs. We have adopted a production management system that efficiently utilizes Thomson, a cost-effective c...

Main 3 products Robot  Precision parts  Shell pack blister
Type of manufacturing Office automation equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Vacuum/Air pressure molding die

2:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining

3:Die manufacturing - Plastic mold - Extrusion molding die

4:Mass production - Plastic - Vacuum molding

5:Mass production - Plastic - Air pressure molding

6:Material - Plastic material distribution - PP (polypropylene)

7:Mass production - Plastic - Biodegradable plastic

3.

YUTAKA CORPORATION Location:  Hyogo  Kobe City Kobe Compound Industrial Park 2-2-4 Mitsugaoka, Nishiku Employees 14

We are experts in manufacturing and supplying plastics, ceramics and heat(thermal)insulation/heat(thermal) resistant materials products mainly for machinery parts. Our product line encompasses a wi...

ROSLIMBOARD H

ROSLIMBOARD H is a low thermal conductivity heat-insulation material and exhibits high performance, thus saving energy and space for equipment. ・Size of Blank Material Thickness : 25, 50mm Length X Width : 600X900 mm ・Applications Heat (Thermal) insulation material for industrial furnace (backup material) Heat (Thermal) insulation material for combustion equipment Heat (Thermal) insulation material for melting and holding furnace

Main 3 products Heat insulation(thermal insulation) and heat resistant materials (rigid heat insulation boards that are generally made of glass fiber, cement and mica as the main raw material)  Composite of glass fiber or carbon fiber and plastics (FRP, GFRP and CFRP).  Fine ceramics
Type of manufacturing Industrial machinery  Electronic parts  Transportation equipment
Recommended manufacturing category

1:Mass production - Plastic - FRP (fiber reinforced plastic)

2:Mass production - Plastic - GFRP (glass fiber reinforced plastic)

3:Mass production - Plastic - CFRP (carbon fiber reinforced plastic)

4:Mass production - Plastic - Thermoset resin

5:Mass production - Plastic - EP (epoxy)

6:Development and production of prototype/Small-scale production - Machining - Machining (resin)

7:Development and production of prototype/Small-scale production - Machining - Lathe machining (resin)

8:Material - Plastic material distribution - PF (phenol-formaldehyde)

9:Development and production of prototype/Small-scale production - Machining - Ceramic

10:Material - Specialized material distribution - Ceramic material

4.

Ono Corporation Location:  Hyogo  Kobe-shi, Kita-ku 5-3 Sorokuhatayama, Yamadacho, Obu Employees 70

We specialize in the manufacture and sale of fluororesin fabricated products (PTFE, PCTFE), engineering plastics (PEEK, Vespel, MC nylon, POM, etc.), rubber O-rings, molded products, metal gaskets and...

Long-established integrated manufacturer of industrial packing and fluororesin gasket since 1907! Ono Corporation (Kobe, Hyogo & Sasebo, Kyushu)

【Long-established integrated manufacturer of industrial packing and fluororesin gasket since 1907! Ono Corporation (Kobe, Hyogo & Sasebo, Kyushu)】 We are a long-established manufacturer of industrial packing and gaskets for the domestic market since 1907. We continue to strive every day by utilizing the "technology" and "know-how" we have developed during our over 100-year existence. Initially, our company produced gland packing. We currently manufacture a wide range of goods, including integrated production from PTFE (fluororesin) powder raw materials, engineering plastics, rubber, and metal processing. We create and support a wide range of products that are essential to people's lives. ~List of compatible products~ 〇Kobe factory〇 Fluororesin molding, resin processing, engineering plastic processing, gland packing, rubber molding, etc. related page⇒ https://en.nc-net.or.jp/company/74850/product/detail/109513/ 〇Kyushu factory〇 Metal processing, laser processing, sheet metal processing, can manufacturing processing, etc. related page⇒ https://en.nc-net.or.jp/company/74850/product/detail/109416/ 【Whats is OR-PACKING ?】 (Description in Japanese) https://www.nc-net.or.jp/company/74850/product/detail/205319/ 【What is OR Flon ?】 (Description in Japanese) https://www.nc-net.or.jp/company/74850/product/detail/180297 ◆Ono Corporation YouTube◆ Please see our YouTube channel for production process videos and manufacturing related trivia videos here! https://www.youtube.com/channel/UCPdFMm8DVM6g-8g14LkMSBg ※Please click "For more details" on the bottom to see our products and more information about us from our website♪ Ono Corporation Tokyo Sales Office   TEL +813-3553-4651 FAX +813-3553-4654 Osaka Sales Office  TEL +816-6582-9612 FAX +816-6582-9615 Kobe Sales Office   TEL +8178-591-1201 FAX +8178-591-1227 Kyushu Sales Office  TEL +81956-30-7331 FAX +81956-30-7320 URL https://www.ohnosha.co.jp/ e-mail info2@ohnosha.co.jp Instagram https://www.instagram.com/ohnosha_packing/ YouTube https://www.youtube.com/channel/UCPdFMm8DVM6g-8g14LkMSBg

Main 3 products Molding and Processing of PTFE and Teflon  PEEK, Vespel, POM, MC Nylon Resin Processing  Gland packing, metal gaskets, rubber O-rings, molded rubber products
Type of manufacturing Heavy electric machinery  Industrial machinery  Transportation equipment
Recommended manufacturing category

1:Mass production - Plastic - Fluororesin

2:Mass production - Rubber - Packing-related products

3:Mass production - Plastic - Engineering plastic

4:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining

5:Mass production - Mechanical processing - Turning machining(plastic)

6:Development and production of prototype/Small-scale production - Machining - Milling (resin)

7:Development and production of prototype/Small-scale production - Machining - Machining (resin)

8:Mass production - Plastic - PEEK (polyetheretherketone)

9:Mass production - Rubber - Fluoro-rubber

10:Mass production - Rubber - NBR

5.

Koowa-tec Co., Ltd. Location:  Shizuoka  Shizuoka 10-69 Nakayoshida Suruga Employees 105

Our company, Koowa-Tec Co., Ltd., is a combination of two specialized factories in which number one factory manufacture to order plastic parts for a variety of industrial machinery by NC machining cen...

Resin Cutting, Machining, Lathe, milling, Cost, Profile Irregularity, Ultra-Thinning

The sample product shown in the picture seems molded product; however, it is actually the result of machining, lathe, and milling. For production of shapes as shown in the picture with a small lot of few 100s and no reproduction plan, milling is effective and has advantages over molding on cost-efficiency and roughness.

Main 3 products Plastic Components for a Variety of Industrial Machineries  Draft Chambers and Scrubbers  Energy Saving Products
Type of manufacturing Industrial machinery  Transportation equipment  Medical equipment
Recommended manufacturing category

1:Mass production - Mechanical processing - NC milling machining

2:Mass production - Mechanical processing - Complex turning machining

3:Mass production - Mechanical processing - NC turning machining

4:Mass production - Mechanical processing - Automatic screw machining

5:Development and production of prototype/Small-scale production - Prototype processing - Bending

6:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

7:Mass production - Mechanical processing - Screw cutting machining

8:Mass production - Mechanical processing - High precision

9:Mass production - Mechanical processing - Turning machining(plastic)

10:Development and production of prototype/Small-scale production - Grinding processing - NC plane grinding

6.

Okutani Wire Netting MFG Co., Ltd. Location:  Hyogo  Koube-shi Chuou-ku Aioichou4-5-5 Employees 63

Since the company's foundation in 1895, we have been growing together with Kobe while being the leading company in the wire gauze industry. After the industrial evolution, we began focusing on innovat...

Super punching ; Infrastructure

Number one in the industry with punching process technology Punch press thick metal sheets with small pitch and smaller holes Our company brand name is “Super punching TM” In the past, it was thought that creating a hole with a shorter diameter than the board thickness or pressing thin board was impossible; however, we have achieved to make the impossible possible while lowering the cost of processing compared to the machining process or laser beam processing. As we can process from thin boards to thick boards with shorter than board thickness distances of each hole, products we manufacture are suitable for a wide variety of usages. More cost efficient than grinding/drilling or laser beam processing. Most common usages are for places where high durability, high drilling rate, and high pressure resistance, such as punching screen, punching filter, etc. is needed http://www.punchingworld.com/super/index.html

Main 3 products Variety of wire nettings  Punching Metal  Variety of processed metal products
Type of manufacturing Heavy electric machinery  Construction material  Transportation equipment
Recommended manufacturing category

1:Material - Steel component distribution - Perforated metal

2:Material - Steel component distribution - Expanded metal

3:Parts manufacturing - Other parts - Metallic mesh manufacturing

4:Parts manufacturing - Other parts - Filter manufacturing

5:Product manufacturing - Construction and civil engineering machinery manufacturing - Construction and civil engineering material manufacturing

6:Product manufacturing - Plant equipment manufacturing - Plant equipment manufacturing

7:Development and production of prototype/Small-scale production - Blank cutting - Turret punch press processing

8:Development and production of prototype/Small-scale production - Prototype processing - Punching

9:Mass production - Metal press - Blanking

10:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

7.

Hakudo Co., Ltd. Location:  Tokyo  Chiyoda-ku 11F, Mitsubishi Building, 2-5-2, Marunouch Employees 751

We maintain an inventory of over 5,000 products, including non-ferrous metals such as aluminum and copper, as well as stainless steel, special steel, titanium and engineering plastics. In addition to...

Main 3 products High Precision Aluminum plates  Aerospace standard compliant material  Special steel
Type of manufacturing Industrial machinery  Transportation equipment  Medical equipment
Recommended manufacturing category

1:Material - Nonferrous metal distribution - Aluminum extrusions

2:Material - Nonferrous metal distribution - Copper and brass products

3:Material - Steel component distribution - Stainless steel

4:Material - Nonferrous metal distribution - Others

5:Material - Nonferrous metal distribution - Titanium

6:Die manufacturing - Plastic mold - Mold base machining

7:Mass production - Mechanical processing - Aluminum alloy

8.

NALUX CO., LTD. Location:  Osaka  Shimamoto-cho, Mishima-gun Yamazaki 2-1-7 Employees 360

A Leader in Plastic Optics Manufacturing Since 1963, Nalux has constantly taken on research and development of plastic optics. Ever since then, we have made a number of technical advancements, tho...

Main 3 products Optical device    
Type of manufacturing Industrial machinery  Transportation equipment  Medical equipment
Recommended manufacturing category
9.

TOKYO METAL CREATE CO., LTD. Location:  Bangkok  Klongtan-nua, Wattana, 87/42, 3rd Floor, The Modern Town, Soi63, Sukhumvit Rd., Employees 9

We accept small quantity, high variety, parts processing from one piece, etc.! (1) Special metals (round bars, plates, wires, pipes) that are difficult to obtain in Thailand 1. Copper, copper allo...

Main 3 products Special metal / pure copper  Copper alloy  Rare metal
Type of manufacturing Not selected    
Recommended manufacturing category

1:Material - Nonferrous metal distribution - Copper and brass products

2:Material - Specialized material distribution - Molybdenum alloy

3:Material - Steel component distribution - Stainless steel

4:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

5:Development and production of prototype/Small-scale production - Sheet-metal processing - Can manufacturing

6:Development and production of prototype/Small-scale production - Jig manufacturing - Jig and tool manufacturing

7:Mass production - Plastic - Engineering plastic

10.

TENPAKU CO., LTD. Location:  Pathum Thani  Lamlukka Moo5 Employees 11

OVERHAUL MACHINE (NC LATHE, GRINDING, MACHINING, MILLING, SPECIAL MACHINE etc.) REPAIR (SPINDLE, SLIDE, TURCITE SLIDE, MOTOR, WELDING MACHINE etc.) REMODELING MACHINE ENGINEERING OF MACHINERY MAKE...

TENPAKU PANASONIC YS-300WX4

TENPAKU Co., Ltd. Address : 88/109 Moo5 Tambon LamLukKa, Amphoe LamLukKa, Pathumtani 12150 TEL : +-66-2-987-0783 Reception time : 8.30-17.30 (Local time/2 hours behind Japan) Establish : September 2014 Capital stock : 4.9 million baht Number of employees : 11 people (including 2 Japanese engineers) Bank : KASIKORNBANK , Bangkok Bank

Main 3 products OVERHAUL     
Type of manufacturing Jigs and tools  Industrial machinery  Machine tools
Recommended manufacturing category

1:Assembly/Inspection - Repair - Machine tool repair

2:Assembly/Inspection - Repair - Industrial machinery repair

1-10 / 411 hits

New registration