EVERFINEST VIETNAM COMPANY LIMITED
Most recent update: 2025-07-18
EVERFINEST was found in 2001 in Hong Kong. We are a professional total molding solutions provider for
plastic industry applications, including Hot Runner system, Temperature Controller, LSR Cold Deck, Auxiliary
full electric Injection Unit and the precision machinery and mold components. Base on our many year
experiences in the plastics industry and support from our German partner, we can provide special made hot
runner system according to customer specific requirement. At the same time, we are good at handling
application with high performance engineering plastics, high cavitation system, and the parts required high
precision. We will do our best to ensure the success of our customer. From project consultation, system
design, production, logistics, system assembly and start up, to customer production training and
maintenance, our professional team can offer you the best support and service.
Our mission statement is “Solution is here!” We emphasis we are not only provide the product to our
customer, but also provide good solution which can ensure the success of customer molding application.
PR message
We are a professional total molding solutions provider for plastic industry applications, including Hot Runner system, Temperature Controller, LSR Cold Deck, Auxiliary full electric Injection Unit and the precision machinery and mold components
Everfinest designs and manufacture hot runner
system optimized for molding production of medical
device components, laboratory and diagnostic
consumables.
Good for high volume production
Ideal for medical parts
One piece mold insert is feasible , enhancing the
reliability
Direct side gating on the part
Good energy efficiency with multi-tip per nozzle (1 to 8
tips)
Minimum gate size up to 0.4mm
•Voltage input protection
•Heater dehumidifying function at constant low power
•Thermocouple J or K Type
•Protection for heater and T/C misplace
•AI and phase shift for high precision control
•Industry standard card slot, module housing for 1-24 zones
•Selectable output current for 15A and 30A
•Touch Screen control
• Heater dehumidifying function at constant
low power
•Deviation Alarms
•Mold data output & input function
• Simple intuitive and user-friendly
operation interface
•Integrated module card slot design for
easy maintenance
With long experienced and excellent care in machining
techniques and the most advanced modern technology in the
world today. EVERFINEST has successful fabricated Hot Runner
systems for PET product line with different sizes from 16-144
drop per mold. The systems are highly efficient and perfectly
balanced and are easily integrated with modern production
lines according to new technologies. Create long-term success
and stability for customers
Cold nozzle design is very versatile. We have multiple nozzle tip
configurations to allow for direct injection into the cavity area on
almost any size molded part
Built in-house to High Quality Standards
Easy to Clean System
Easy to Assemble/Disassemble
All standard Nozzle Components are Stock
Ready to Ship
Several Options for Balance Control
In Press Maintenance Options
Full Electric Servo Control
Stand Alone Add-On Injection Unit
• Direct connect to any IMM for single LSR/multi
color molding, no need to invest LSR or multi color
machine to maximize the equipment utilization
• Install directly onto the mold, either horizontally or
vertically
• Remote control and diagnosis
• One button operation system
• Compact and integrated close loop cooling system
• Auto purging
Two stages Plunger Injection
High accuracy of shot size, position and pressure
control
Shot weight accuracy can achieve 0.0009/0.01mm
Weight variation less than 0.5% of total shot
weight
Medical Core & Insert
Semiconductor Mold Part
With so many years of hot runner application experience,
Everfinest developed EFH hot runner system. The aim is to provide a
competitive pricing system with faster delivery to the customers for high
precision and general-purpose applications.
We have set a high-quality standard for our hot runner system. We target
to reach the standard of the leading international brands, in term of
design, selection of material and production control. We strive to provide
high quality products for our customer at reasonable cost.
- Q2 fits for small injection size and limited installation space, also widely
applied on packaging & medical application.
- Q3 can manage most general application, and suitable for high
pressure thin wall parts.
- Q4 can work with larger injection part.
Different gating options are available for each series of nozzle, providing
the best choice for your injection need.
The properties of plastic materials are becoming
stronger, and the application of high-performance
material is becoming more common. We offer good
solution in dealing with these high
performance materials, such as high temperature
materials PA, PET, LCP, PPS, PEEK, PEI…. and the
materials with high glass fiber content. We have
many successful cases for those materials.
 |
Part processing（ Die manufacturing / Plastic mold ） |
|---|
| Company name | EVERFINEST VIETNAM COMPANY LIMITED | Website URL | http://www.everfinest.com |
|---|---|---|---|
| Street address |
Bac Ninh Bac Ninh Socialist Republic of Vietnam
[See map] |
Person in charge | Johny Nguyễn Ngọc Trường |
| Telephone number | +84-944906396 | Fax number | Log in to display |
| Capital | Employees | 15 | |
| Annual sales | EMIDAS Member Number | 101140 | |
| Type of manufacturing | Machine tools / Measuring machinery / Medical equipment | ||
| Main 3 products |
|
||
| Large | Medium | Small |
|---|---|---|
| Die manufacturing | Plastic mold | Manufacturing Part processing Mold base machining Thin wall injection molding die Injection molding die for microfabrication (5 mm or smaller) Core and cavity machining |
