PR message
SHOEI TRADING (THAILAND) delivers top-quality industrial and automotive products with unmatched reliability and superior service.
The high-performance hydrocarbon-based cleaning agent "NS Clean" was developed based on the concept of "for people and the environment of the earth" and has been highly evaluated in many industrial fields as a cleaning agent friendly to the natural and working environments.
"NS Clean" has achieved both dryness and safety by realizing an extremely narrow boiling point range in addition to excellent cleaning performance. Moreover, it is not subject to environmental regulations such as the PRTR Law and the Ordinance on Prevention of Organic Solvent Poisoning. It has been well received in a wide range of cleaning fields, mainly for degreasing and electrolytic cleaning of metal parts in general. In addition, it has a high recovery rate through distillation and regeneration, and demonstrates stable performance even under continuous regeneration.
Hydrocarbon-based cleaning agent NS CLEAN 100W
NS CLEAN is a cleaning agent containing a special surfactant in NS CLEAN.
The surfactant provides the following excellent performance.
Water displacement performance
Quickly draws away water adhering to the object to be cleaned.
Separated water becomes water droplets which settle quickly due to the difference in specific gravity.
Effective for removing water after water-cleaning of water-soluble stains (e.g. water-soluble cutting oil) and after wet barrel polishing.
Fine particle removal performance
Quickly separates inorganic particulates (metals, ceramics) adhering to the object being cleaned into the liquid.
Effective for removing abrasive particles, swarf, etc.
Typical properties
Appearance: pale yellow transparent
Density (15°C, g/c㎥): 0.737
Flash point (°C): 52
Fire Services Act (Hazardous material Class 4): Petroleum No. 2
Industrial Safety and Health Law (Organic Solvent Poisoning Prevention Law): Not applicable
PRTR Law: Not applicable
Revised Air Pollution Control Law Hazardous Air Pollutants : Not applicable
VOC Regulations: Not applicable
Points to note when using
After using NS CLEAN W type, it is necessary to rinse with NS CLEAN.
Use a simple metallic tank or explosion-proof cleaner as the liquid is flammable.
Use at room temperature with good ventilation.
The high-performance hydrocarbon-based cleaning agent NS Clean was developed based on the concept of ‘for people and the environment’ and is highly regarded in many industrial fields as a cleaning agent friendly to the natural environment and the working environment.
In addition to its excellent cleaning performance, NS Clean has an extremely narrow boiling point range, making it both dry and safe. Moreover, it is not subject to environmental regulations such as the PRTR Law and the Ordinance on the Prevention of Organic Solvent Poisoning. It has been well received in a wide range of cleaning fields, particularly in the degreasing and electrolysis of metal parts in general. It also has a high recovery rate through distillation and regeneration, and demonstrates stable performance even under continuous regeneration use.
Paraffin
Normal paraffin
Hydrocarbon-based cleaning agent NS CLEAN 220W
NS CLEAN is a cleaning agent containing a special surfactant in NS CLEAN.
The surfactant provides the following excellent performance.
Water displacement performance
Quickly draws away water adhering to the object being cleaned.
Separated water becomes water droplets which settle quickly due to the difference in specific gravity.
Effective for removing water after water-cleaning of water-soluble stains (e.g. water-soluble cutting oil) and after wet barrel polishing.
Fine particle removal performance
Quickly separates inorganic particulates (metals, ceramics) adhering to the object being cleaned into the liquid.
Effective for removing abrasive particles, swarf, etc.
Typical properties
Appearance: pale yellow transparent
Density (15°C, g/c㎥): 0.756
Flash point (°C): 81
Fire Services Act (Hazardous material Class 4): Petroleum No. 3
Industrial Safety and Health Law (Organic Solvent Poisoning Prevention Law): Not applicable
PRTR Law: Not applicable
Revised Air Pollution Control Law Hazardous Air Pollutants: Not applicable
VOC Regulations: Not applicable
Points to note when using
After using NS CLEAN W type, it is necessary to rinse with NS CLEAN.
Use a simple metallic tank or explosion-proof cleaner as the liquid is flammable.
Use at room temperature with good ventilation.
The high-performance hydrocarbon-based cleaning agent NS Clean was developed based on the concept of ‘for people and the environment’ and is highly regarded in many industrial fields as a cleaning agent friendly to the natural environment and the working environment.
In addition to its excellent cleaning performance, NS Clean has an extremely narrow boiling point range, making it both dry and safe. Moreover, it is not subject to environmental regulations such as the PRTR Law and the Ordinance on the Prevention of Organic Solvent Poisoning. It has been well received in a wide range of cleaning fields, particularly in the degreasing and electrolysis of metal parts in general. It also has a high recovery rate through distillation and regeneration, and demonstrates stable performance even under continuous regeneration use.
Paraffin
Normal paraffin
Hydrocarbon Cleaning Agents
NS Clean 100 (Class 2 Petroleum)
Boiling point: 171°C
Flash point: 51°C
Cleaning of processing oils
In addition to its excellent cleaning performance, NS Clean has a very narrow boiling point range, making it both dry and safe, and it is not subject to environmental regulations such as the PRTR Law and the Ordinance on Prevention of Organic Solvent Poisoning. It has been well received in a wide range of cleaning fields, centering on degreasing cleaning of metal parts in general.
Applications
Cleaning of mineral processing oils
It has been widely used as an alternative cleaning agent to chlorinated and brominated solvents.
Features
1. Excellent cleaning performance
Demonstrates excellent cleaning effects in a short time
2. Shortening of working time due to its excellent drying property
Narrow boiling point range and excellent drying performance shorten working time.
3. Recyclability
Stable quality can be maintained with little loss even after repeated distillation and regeneration.
Easy liquid control as quality remains unchanged through distillation and regeneration.
4. Long life for continuous regeneration
Chemically and thermally stable material with a long service life
Can be used safely for continuous regeneration by reduced-pressure steam cleaning and reduced-pressure distillation/regeneration
Regulations
PRTR Law: Not applicable
Ordinance on Prevention of Organic Solvent Poisoning: Not applicable
Hydrocarbon Cleaning Agents
NS Clean 200 (Class III petroleum)
Boiling point: 191-207°C
Flash point: 70°C
Cleaning of processing oils
In addition to its excellent cleaning performance, NS Clean has a very narrow boiling point range, making it both dry and safe, and it is not subject to environmental regulations such as the PRTR Law and the Ordinance on Prevention of Organic Solvent Poisoning. It has been well received in a wide range of cleaning fields, centering on degreasing cleaning of metal parts in general.
Applications
Cleaning of mineral processing oils
It has been widely used as an alternative cleaning agent to chlorinated and brominated solvents.
Features
1. Excellent cleaning performance
Demonstrates excellent cleaning effects in a short time
2. Shortening of working time due to its excellent drying property
Narrow boiling point range and excellent drying performance shorten working time.
3. Recyclability
Stable quality can be maintained with little loss even after repeated distillation and regeneration.
Easy liquid control as quality remains unchanged through distillation and regeneration.
4. Long life for continuous regeneration
Chemically and thermally stable material with a long service life
Can be used safely for continuous regeneration by reduced-pressure steam cleaning and reduced-pressure distillation/regeneration
Regulations
PRTR Law: Not applicable
Ordinance on Prevention of Organic Solvent Poisoning: Not applicable
Professional specifications specialized for organic solvent odors.
Powerful professional specifications for space-saving and intensive deodorization of paint and adhesive odors in nail salons and during craft work. For nail art and eyelash extensions, and the smells that occur before they dry.
Powerful deodorization of organic solvent odors in a small space.
Corresponds to toluene, xylene, styrene, acetone, paint, and adhesive odors.
Can be used at home or on the go. Compact yet deodorizes well.
It can be used anywhere there is an ordinary 100 V outlet or USB power supply. Its compact size makes it ideal for use around the kitchen, cigarettes, pets, and toilets.
With a mobile battery, it can be used in an even wider range of situations.
Medium-sized deodorization device for use in mid-size factories and workshops
This device is useful for improving the health and efficiency of working craftsmen because it powerfully deodorizes various harmful gases and bothersome odors in factories and workshops. The tough metal body ensures that it is not affected by the environment.
You can choose from duct type or mesh type depending on your usage situation.
1. for storage of smelly materials
2. for improvement of work environment in mid-term-proof factories, workshops, and work sites
3. for countermeasures against odor leakage to the surrounding area
No need for extensive plumbing work
The stand-alone type can be used anywhere where there is a power supply.
Can be used with overseas power supply specifications.
Approximate filter replacement time is 3 months to 1 year.
*The time frame may vary depending on the environment of use.
Standard Specifications
Power supply voltage: AC100V
Power consumption: 74W
Airflow: min. 234 m3/h - max. 660 m3/h, adjustable by volume
Dimensions: W300 x H1018.4 x D300mm
Product weight: 25.3 kg
Company name | SHOEI TRADING (THAILAND) CO., LTD. | Website URL | |
---|---|---|---|
Street address |
Huai Khwang District Bangkok Kingdom of Thailand
[See map] |
Person in charge | Masatoshi Iwashiro |
Telephone number | Log in to display | Fax number | Log in to display |
Capital | 110,000,000 THB | Employees | 11 |
Annual sales | Unregister | EMIDAS Member Number | 104597 |
Type of manufacturing | Industrial machinery | ||
Main 3 products |
|