1. Data acquisition speed and control
AGX-V2: Uses an ultra-fast 10 kHz (10,000 samples per second) data sampling rate and an ultra-fast 1 kHz head control. This is achieved through multiple processors and controllers, allowing it to capture even the smallest and most abrupt changes in the sample, such as the precise breaking point of brittle materials. This level of speed is critical for accurately characterizing dynamic material behavior.
2. Accuracy and reliability
AGX-V2: Boasts an extended guaranteed test force accuracy range of 1/2000 for a single force cell (compared to 1/1000 or 1/500 for some others). This means that a single force cell can reliably cover a much wider range of test forces, reducing the need for frequent force cell replacement and calibration. It also ensures simultaneous sampling on all channels (force sensor, extensometer, external input), improving the accuracy and reliability of calculated values ​​such as elastic modulus.
3. Automation and user-friendliness
AGX-V2: Integrates several features to enhance operability and reduce manual tasks:
Multi-Joint Feature: Simplifies clamping changes, allowing quick and easy connection of different types of clamping (tension, compression, bending) without replacing heavy joints.
Smart Controller/Operation Controller: Features a color LCD touchscreen for direct machine operation and setup, often eliminating the need for a separate PC for basic tests.
Voice Operation (XV-Talk™): A unique feature that allows the operator to control the machine with key voice commands (e.g., “Start Test,” “Return”), eliminating the need to press buttons frequently and enhancing safety.

Autotuning Feature: Provides precise strain control, even in noisy or interrupted conditions, where conventional autotuning is difficult.

4. Safety Features
AGX-V2: Prioritizes operator and machine safety with advanced features such as:
Highly impact-resistant, transparent safety cover with interlock functions to prevent testing if the cover is open.
Intelligent Crosshead: Recognizes its position and prevents clamp collisions by providing warnings and automatically stopping movement if the clamps are too close together.
Overload Detection Function: Automatically stops the machine head if the test force exceeds the capacity of the force sensor, reducing the risk of damage.

Self-Diagnostic Function: Continuously monitors the machine status, sensor calibration, power supply and communication, notifying the user of potential problems and assisting in maintenance planning.

5. Frame Stiffness and Straightness
AGX-V2: Features a high-rigidity frame design with a newly designed guide column and support ring that maintain perpendicular alignment to the table surface. This improves measurement repeatability, especially for high-hardness or brittle materials that are sensitive to frame stiffness and straightness.