[R-bending process with both sides left straight] Belt bending R-bending of plate with both straights R-bending with different lengths of both left and right straights
Material dimensions are 160 mm high with an internal diameter of 141 R,
This is a double straight-left bend with a bending angle of approximately 190°.

As the name suggests, both ends of the plate are left unbent (straight) and only the central part of the plate is bent.
Most products are bent with the same straight length on both sides,
In the case of this product, the straight lengths are different on the left and right sides, which increases the degree of difficulty.
An employee who has actually done the bending told us...

The difficult part of straight bending is that when you push the border between the straight and the bent part, the straight part may be pushed even a little.
If the straight part is pushed even a little, or if the push is too weak, the straight part will be bent.'The difficult thing about straight bending is that when you press the straight edge, even a little, or if you press too hard, the dimensions of the R part are determined, but the dimensions of the straight edge and the straight edge are not.
If the straight edge is rolled up, it will no longer be a product, so bend it carefully.’

The border between the bending point and the straight part is the most difficult part of the bending process,The bending process was particularly difficult this time because both sides were straight.Especially this time, the lengths of the two straight sections were different,The bending process was carried out through a trial-and-error process of fine-tuning.

★See also similar bending pages!
【Hopper conical bending】 Iron hopper bending, can bending, high precision
https://en.nc-net.com/company/85641/product/detail/201833

【Rounded corner hopper bending】 High difficulty special bending is also available!　Steel can bending
https://en.nc-net.com/company/85641/product/detail/205923

※YouTube links on emidas are similar products!

We meet our customers' needs in every aspect to provide "bending processing" + α value.
We can help you centralize arrangements with manufacturers, manage delivery dates and quality control, and avoid problems with transportation and loading, etc.
Do you have any problems with bending?
We can handle even hand-drawn drawings. We can also arrange materials. We can accept orders for one piece or thousands of pieces.

We can also deliver large and thick bent products such as iron, stainless steel, and aluminum.
We also deliver to Kanto region, Nagano, Niigata, Miyagi, Ishikawa, Toyama, and Hokuriku region.
We can also pick up materials supplied by you.
Please feel free to contact Fujitec.

★Introduction of Fujitec's SNS Please feel free to follow us! m(_ _)m

【YouTube】 In-house video editing. Various processed videos are uploaded!
https://www.youtube.com/channel/UCiVwqGhvRkUgMBmmSqL5DmA

【Instagram】 Product introductions, company events, editor's tweets, etc...
https://www.instagram.com/fujitec_mage/?hl=ja

【Twitter】 From the managing director! Information on bending products, events, tweets from the managing director, etc...
https://twitter.com/i73fujitec?t=w-XRpi4BWGmwUMBT9rI3Ug&s=09

【Facebook】 Linked to the company blog! Product introductions, company events, etc...
https://www.facebook.com/MAGE.FTC/


****************************************
Fujitec Corporation
100-2, Angyohara, Kawaguchi-shi, Saitama-ken, Japan
tel:048-297-5103
fax: 048-297-5104
Email: info@mage-ftc.co.jp
WEB: http://www.mage-ftc.co.jp/