Industrial material

Ichinen Chemicals

Part Number / 0095 (NK-095)
Product Name / Super Zinc Coat 95
Capacity / 300 mL
Quantity / 24 cans

Features:
- When very fine zinc powder reacts chemically with anti-rust agents on an iron surface, the zinc-coated surface becomes stable and transforms into an insoluble film to enhance corrosion protection.
- Can be coated with nearly any type of lacquer on this zinc-coated surface (cannot be used with phthalic anhydride paints as it may cause delamination between paint layers).

Applications:
- Used on storage compartments of ships, tanks, bridge construction, and ports.
- Rust prevention for railway equipment, generators, signal stations, building constructions, automobiles, etc.
- Repairs scratches, burn marks, or dirty spots on zinc-coated surfaces.
- Rust prevention or repairs on weld seams, installation marks, and other damages.
- Used as a rust-preventive and repair paint in zinc-coated areas around scaffolding.

High Zinc Concentration:
- The dry paint film contains over 84% zinc powder.
- Can be coated with nearly any type of lacquer on this zinc-coated surface. The primary purpose of zinc coating (gray) is corrosion protection.
- Commonly used in shipbuilding, port construction, etc., or as an anti-rust primer.

Specification Table:
- Zinc in dry paint film / over 95%
- Salt spray test / over 1000 hours
- Outdoor use / over 2 years
- Film thickness / 15–25 µm
- Drying / 20°C (standard) / about 5 minutes
- Hard drying / 8 hours
- Coated area / 0.3–0.5㎡
- Heat resistance (short-term) / 180 ℃
- Heat resistance (long-term) / less than 150℃