Delivery record NO.1! The industry standard fiber laser cutting machine that has completely renewed
Oscillator-equipped CO2 laser cutting machine Nippon Sanso TANAKA, the No. 1 delivery record, enables "low running cost" and "stable cutting of thick plates" with its own fiber laser technology.

Consumables such as optical mirrors and laser gas, which are indispensable for CO2 lasers, are eliminated, and running costs are reduced along with significantly reduced power consumption.

Stable thick plate cutting realizes "shortening of processing time" and "improvement of fine processing". We will solve the problems of "cost" and "cutting quality".

[Features]
1. quality cutting
We developed TANAKA's unique fiber laser processing head to significantly improve cutting quality.
1) Significantly improved the indentation and bevel angle of the cutting surface, which were conventional problems with fiber laser cutting of mild steel.
2) Cut surface roughness is also improved, realizing cutting quality equal to or better than CO2 laser.

2. High speed (CW) cutting
* CW (abbreviation for Continuous Wave) cutting: Cutting at high speed by continuous oscillation of full power
1) In addition to the high pulse quality typical of CO2 lasers, FMRIII can also improve productivity through CW high-speed cutting.
2) CW cutting is possible up to t19mm at 6kW and t25mm at 10kW. (Speed difference from pulse cutting is about 1.3 to 1.9 times)

3. Improved productivity by eliminating corner processing
Laser cutting eliminates the microfabrication of corners and sharp corners (corners). Productivity is greatly improved by enabling cutting without slowing down or stopping

4. Improved safety and workability
Equipped with a double cover (torch cover + entire body cover) on the cutting machine body. By adopting our original fiber laser cutting surface plate (Diablock II) as the cutting surface plate, safety is ensured from the reflected light of the fiber laser. Eliminates the need for light shielding equipment around the cutting machine. Achieves the same workability as the conventional CO2 laser machine.

You can see the specification details from the link below.