Manufacture Overhaul Rapid and Optimal Co., Ltd.
Most recent update: 2025-09-03
PR message
Our Thai staff, who are fluent in Japanese, and our Japanese staff, who are deeply rooted in the local community, work in cooperation with the head office to provide solutions to all kinds of problems with the name "machine," from industrial equipment to food processing equipment, based on the experience in repairing various types of production equipment and machining technology that Mero Seisakusho has cultivated over 40 years. faster than anywhere else! We are able to respond to all kinds of problems with the name "machine" faster than anywhere else!
- Acceptance of machinery
- Installation of machinery
- Adjustment of machinery
- Periodic inspection of machinery
- Troubleshooting (repair, modification, improvement)
Others
Automation using robots, etc.
Design and manufacture of robot hands
Design and manufacture of original manufacturing machines
Manufacture and production of jigs and tools for cutting machines
PLC deterioration, battery replacement due to aging, damage due to contact aging
We also offer a wide range of support to our company and collaborating manufacturers.
Please leave the regeneration/reformation and maintenance of the control panel and machine to us.
The Japanese engineer who can speak Thai
Thai engineer fluent in Japanese
We will act on behalf of manufacturers who cannot travel from Japan to Thailand.
Even if we have a service base in Thailand, we will help manufacturers who do not have enough manpower.
Overhauled a vintage screw rolling machine (rolling machine) that has been used for nearly 20 years.
The content of the request was to repair an old machine, and we were allowed to regenerate and maintain the machine because "the manufacturer no longer exists because it is an old machine" and "there is no place to repair it because it is an overseas machine".
As for the work, first, disassemble work such as removing the cover and parts.
By adjusting the alignment of the pipe and the part to be threaded and the tension of the belt, the processing accuracy can be improved. Replace all wiring, pipes, and oil seals with new ones to prevent oil leakage. Since the electric wires and plugs of the old motor had deteriorated over time, replaced them with new ones to prevent fire.
Finally, replaced the label and cleaned almost all the parts.
It was covered with oil mist and dust because it was old and had not been cleaned further, but it is now clean.
In the same way, even if it is an old machine that other companies cannot handle easily
Please leave the reproduction and maintenance to Mono Thailand.
Since It's only a short time we remodeled it, so if a problem occurs next time, we will respond immediately.
The strengths of MoroThailand are as follows
The Japanese engineer who can speak Thai.
Thai engineer who can speak Japanese.
Any manufacturer that is Always ready for repair that requires urgent repair
Anyone from a foreign country that cannot cross Thailand, we will be the substitute for you guys. Further to this, some companies having Any manufacturer that is based in Thailand, we would be able to help
A packing machine for packing stationery and miscellaneous goods. We got a request to modify the machine to increase the speed of additional 35%
Modify, remodel and improve
Let us MOROThailand handle!
The Japanese engineer who can speak Thai.
Thai engineer who can speak Japanese.
Any manufacturer that is always ready for repair that requires urgent repair
Anyone from a foreign country that cannot cross Thailand, we will be the substitute for you guys. Even with some companies having Any manufacturer that is based in Thailand, we would be able to help
Asked to relocate an old car lift to install a new car lift
We will undertake the work on behalf of the manufacturer who cannot travel to Thailand.
The Japanese engineer who can speak Thai
Thai engineer fluent in Japanese
We will act on behalf of manufacturers who cannot travel from Japan to Thailand.
Even if we have a service base in Thailand, we will help manufacturers who do not have enough manpower.
From the Japanese machinery manufacturer's request, we did the modification and fix the noodle machine which is at the instant noodle cup factory.
What changed was that only a certain size of noodle cylinder could be produced with the machine now have a premier size that can also work with the same production line.
As for work
Replacement of parts for modification, the addition of electrical wiring, adjustment of each part
Various problems occur during modification,
The function that should work is damaged and it does not work
Moreover, because the customer's line had different specifications from the original,
Unplanned work occurred and it was long-term work because it was modifying work while dealing with it.
However, while receiving instructions remotely from the manufacturer
We were able to respond safely by replacing parts and adjusting the operation.
It's only a short time since we modify it, so if a problem occurs next time, we will respond immediately.
Strengths of MoroThailand are;
The Japanese engineer who can speak Thai.
Thai engineer who can speak Japanese.
Any manufacturer that is always ready for repair that requires urgent repair
Anyone from a foreign country that cannot cross Thailand, we will be the substitute for you guys. Even with some companies having Any manufacturers that are based in Thailand, we would be able to help
Machines imported from Japan
while receiving instructions for remote connection work with the machine manufacturer
Installation, assembly, adjusting piping and wiring, leveling, accuracy adjustment, and test run were done on (NISSEI double-headed grinding machine)
Advance preparation: Online meetings with clients, manufacturers, and our company
Working period: 3 days
Currently, with the Covid-19 situation, the strength of our company is that the engineers of the manufacturer can smoothly carry out from the preparation to the completion of the work without having to travel to the site by themselves.
Customer service (repair/overhaul) can also be handled speedily by the above method.
The construction is done by local Thai staff, but the work is done at the same level as the installation work in Japan.
We use smart goggles to instruct work from our head office in Japan.
At the head office in Japan, we have been performing installation and adjustment work for about 30 units a year for 40 years.
Through online work through smart goggles, we utilize our technology and experience in Japan for work in Thailand.
We will act on behalf of manufacturers who cannot travel from Japan to Thailand.
Since the local work staff is fluent in Japanese, it is possible to perform installation adjustment work while receiving instructions from the manufacturer in Japan.
There is no need to worry about communication errors that occur when giving work instructions to staff with Japanese disabilities via an interpreter.
After the equipment is installed in collaboration with the manufacturer, it is possible to perform the accuracy adjustment and final adjustment in collaboration with the manufacture.
Even if we have a service base in Thailand, we will help manufacturers who do not have enough manpower.
There can be accidents related to a bandsaw such as when cutting the finger, severely chopping off the finger off in the worsts case. This time, our customers, who have been using a bandsaw in their company have almost resulted in the work accident, and they have reconsidered safety measures and modify the machine, and request MoroThailand.
We have checked the desired minimum and maximum size when working with cutting and noticed that a commercially used clamp can be used. Hence, by sliding the clamp front and back smoothly, a cut becomes possible. Hence the worker there can feel relieved.
Strengths of MoroThailand are;
The Japanese engineer who can speak Thai.
Thai engineer who understands Japanese.
The manufacturer is always ready for repair that requires urgent repairs
Anyone from a foreign country that cannot cross Thailand, we will be the substitute for you guys. Even with some companies having Any manufacturer that is based in Thailand, we would be able to help
Overhauled a shredder that was quite old.
Excellent sharpness by replacing all worn blades.
We can handle even old machines for which the manufacturer no longer exists.
We will help you and the machine to work together for as long as possible.
We will act on behalf of manufacturers who cannot travel from Japan to Thailand.
The Japanese engineer who can speak Thai
Thai engineer fluent in Japanese
Even if we have a service base in Thailand, we will help manufacturers who do not have enough manpower.
| Company name | Manufacture Overhaul Rapid and Optimal Co., Ltd. | Website URL | |
|---|---|---|---|
| Street address |
Nong Bon, Prawet Bangkok Kingdom of Thailand
[See map] |
Person in charge | MANUFACTURE OVERHAUL RAPID AND OPTIMAL CO., LTD. |
| Telephone number | +66-2-115-8838 | Fax number | +66-2-115-8010 |
| Capital | 4,000,000 THB | Employees | 13 |
| Annual sales | Unregister | EMIDAS Member Number | 94274 |
| Type of manufacturing | Industrial machinery | ||
| Main 3 products |
|
||
