BETHEL Co., Ltd.
Most recent update: 2022-11-08
PR message
Thank you for accessing the Bethel Co., Ltd. website on EMIDAS.
We have manufactured electrical machinery parts for over 35 years.
Since the time when we engaged in manual assembling through trial and error, we have progressed and reached the point that we are currently developing a variety of our own automated machinery and jigs and reducing excess, waste, unevenness and defects.
We have obtained ISO certification, complied with RoHS regulations and carried out manufacturing with due to consideration for the environment and hazardous substances. Therefore, we can deliver safe and reliable products to our customers.
We are specialists in manufacturing using plastic parts in the medical, hygiene, and nursing fields.
Our particular specialty is small plastic parts, and we can produce products with holes drilled as small as 0.02mm. We can also carry out specialized bending of plastic parts. We put these bending techniques to be used in our plastic needle products. Please see "Technology & Products" for more details.
Bethel is authorized as a medical equipment manufacturer by the governor of Ibaraki Prefecture.
The pump is included in an automatic urine aspirator for patients requiring nursing care.
By switching to resin and smaller scale, lighter weight with durability and suction power is enabled.
The products can be used for a variety of applications including for small amounts of suction or discharge.
It is a dosing control system for patients who need medication.
By sharing information among doctors, pharmacists, and nurses, it is used to monitor patients’ dosing status.
This system accurately offers a necessary amount of medicine at regular times.
This is the next negation dosing control system!
The Bethel Tip 21.
There are a variety of practical applications including dental, medical, and cosmetic containers.
Total length 41mm Tip outer diameter 0.8mm Tip inner diameter 0.6mm
Length, diameter, and shape can be changed.
High thermal conductive resin, recently developed resin material, has remarkable heat conductivity and it has begun to be used for application in parts which requires thermal conductivity in place of metal.
For example, plastics are used in LED light bulb housings and heat sinks, and as replacements for specific metal components in automobile related applications.
However, because there are differences in the thermal conductivity of each component part, in order to determine the original performance of the parts, it is vital to measure the thermal conductivity distribution.
Bethel possesses its own original high thermal conductive resin molding technologies. We carry out preliminary resin flow analysis beforehand; we can verify resin flow characteristics and thermal distribution variation using a thermo wave analyzer (TA).
We have developed nozzles which can be used for a variety of applications including use in the medical, electronic component, and semiconductor industries!
The R section is 70 degrees and the tip 0.5mm, providing an angle and fineness not found in other products!
This makes these nozzles perfect for use in areas that were hard to reach with prior products.
We are able to handle all types of orders from small lots to mass production.
We also handle assembly, inspection, packaging, and shipping.
We can also handle inspections of all products in temperature controlled inspection rooms.
We can also carry out pre-shipping sterilization.
Feel free to contact us with any inquiries!
The "Uni Sassa" product, which we developed jointly with businesses from Kamaishi City, Iwate Prefecture, will be on exhibit at the "Good Design Expo 2011" held at the Tokyo Big Sight from 8/26-8/28!
This product enables the efficient removal of the roe from the sea urchin ("uni" in Japanese) shell without damaging the roe. The product is an idea born, based on opinions of producers of sea urchin from the tsunami disaster-struck Sanriku coast.
Once we received a development request for needles used in dental treatment from our customers, we began our integrated production from product development to die design, injection molding, inspection, and packaging.
Development results: Maintaining an opening inner diameter of 0.4mm and including a bend in the needle section makes it easier for dentists to carry out treatment.
We are able to handle all types of orders from small lots to mass production along with assembling, inspecting, packaging, and shipping.
For inspections, all products are inspected within temperature controlled inspection rooms.
We can also carry out pre-shipping sterilization.
Contactless measurement of thermal diffusion ratio is now possible!
It is allowed for assessment of everything from organic films to diamonds.
•Contactless measurement utilizing lasers
•Simple operation consisting of simply placing a sample
•The high degree of freedom of sample shapes allows for specification of individual measurement locations
•A wide measurement ranges from organic films to diamonds
•Easily configured absolute value measurement method
•Measurement of in-plane direction and thickness direction possible -> verification of sample anisotropy
 |
Medical equipment manufacturing（ Product manufacturing / Medical equipment manufacturing ） |
|---|
| Company name | BETHEL Co., Ltd. | Website URL | http://www.bethel.co.jp/eng/index.html |
|---|---|---|---|
| Street address |
Ishioka-city Ibaraki Japan
[See map] |
Person in charge | Eriya Elias Suzuki |
| Telephone number | +81-299-23-7411 | Fax number | +81-299-24-4710 |
| Capital | 48,000,000 JPY | Employees | 84 |
| Annual sales | 1,300,000,000 JPY | EMIDAS Member Number | 79619 |
| Type of manufacturing | Measuring machinery / Electronic parts / Medical equipment | ||
| Main 3 products |
|
||
| Primary clients |
|
||
| Large | Medium | Small |
|---|---|---|
| Designing | Mold designing | Injection molding die 3D modeling (plastic) NC data creation (plastic) |
| Designing | Product and part designing | Medical equipment designing Measurement/testing device designing |
| Designing | Jig and tool designing | General jig designing Mass production jig designing Automatic tool designing General-purpose jig designing |
| Designing | Industrial equipment designing | Automatic machinery manufacturing Precision automatic machinery designing Industrial machinery designing Energy-saving machinery designing |
| Designing | Simulation | 3D modeling |
| Development and production of prototype/Small-scale production | NC machining | Machining (vertical) NC milling NC lathe machining |
| Development and production of prototype/Small-scale production | Electrical discharge machine | Wire electric discharge machining Micro hole machining Electric discharge machining |
| Development and production of prototype/Small-scale production | Jig manufacturing | General jig manufacturing Mass production jig manufacturing Jig and tool manufacturing |
| Die manufacturing | Plastic mold | Designing Manufacturing Insert molding die Outsert molding die Below 60 t 60 - 300 t Cassette-type molding die Thermoset resin die |
| Mass production | Plastic | Insert molding General-purpose material PMMA (polymethyl methacrylate) Engineering plastic PBT (polybutylene terephthalate) PPS (polyphenylene sulfide) PI (polyimide) GFRP (glass fiber reinforced plastic) Elastomer Below 60 t 60 - 300 t Injection molding Handles small-scale production |
| Assembly/Inspection | Assembly | Precision equipment assembly Industrial machinery assembly |
| Assembly/Inspection | Inspection | Plastic Measuring |
| Product manufacturing | Medical equipment manufacturing | Medical equipment manufacturing Dental products |
